coldpipe alternative? good or bad idea

[1995240sxSE]

i was looking for some vacuume line and came across this and was thinking would this be a good idea bad idea or no different for the coldpipe?

http://www.hightempsilicone.co...312RD

I was thinking it would work if you had bov on hot pipe and iacv was hooked up pre turbo. Who knows!

[NateDogg]

You may have a hard time bending that. Also, you dont want to run the IACV pre-turbo because it bleeds off boost into the intake.

Ideally BOV should be mounted on cold pipe.

This would be fun to use as a turbo inlet pipe if you are artsy fart.

[1995240sxSE]

i didnt see that it was 12 inches, I had looked at another that was 72 inches. Even with the iacv mounted I could cut the silicon and put a nipple piece for iacv , then into the throttle body! I think I am gonna buy and try! That would cut my intercooler pipes from 3 couplers to basically none. I could use the pipe as coupler, go straight to intercooler and throttle body with a iacv pipe in the middle! I am gonna try!