Coils i used on my RB20det.

Post by **soundmonkey** » Wed Dec 31, 2008 8:53 pm

Hey all.

I'm new to the forum but I've got a lot of help here in the past and I appreciate it a lot! So i figured i should post this just to try an help. I got rid of the stock RB coils and put 6 1995 chevy HEI coils on it and made a seat for them and they work great! There 48000 volt Vs the 19000 that the RB puts out. I'll post a few pictures soon so you can have a look for your self.

Thanks all
Modified by soundmonkey at 11:10 PM 12/31/2008

Post by **Cjmartz2k** » Thu Jan 01, 2009 2:39 pm

pics please

Post by **fast_s14** » Sun Jan 04, 2009 6:14 am

any up dates on your setup?

Post by **soundmonkey** » Mon Jan 05, 2009 6:50 pm

Hey guys sorry i've been real busy.. The coils worked great. I will be getting some pictures as soon as i get back home to my computer. the only thing i noticed was it starts up differently. it take 2 or 3 seconds longer. Not sure why yet. other then that every thing is working like it should. It runs very strong!

Post by **soundmonkey** » Fri Jan 09, 2009 5:02 pm

Yeah... How do you add pictures or can you? I have a bunch..

Post by **johnny butt** » Fri Jan 09, 2009 5:20 pm

photobucket.com

then link them using the [ img] urlhere [/img]tags.

Post by **KC240RB** » Sat Jan 10, 2009 11:46 am

Come on get these pictures up. I want to see this...

Post by **soundmonkey** » Mon Jan 12, 2009 11:30 pm

http://s385.photobucket.com/al...key11/

Sorry it took so long. I'll get you guys a movie so you can hear what's going on with it when it starts.

Post by **240z4u** » Tue Jan 13, 2009 4:52 am

Looks good! Nice job. Reminds me to finish my LS6 coil setup

Post by **SullivanRacing06** » Tue Jan 13, 2009 4:56 am

remindes me of a yota 7m coil set sorta, nice work, how do they work on the rbs?

Post by **Yellow4g63** » Tue Jan 13, 2009 2:46 pm

soundmonkey wrote:http://s385.photobucket.com/al...key11/

Sorry it took so long. I'll get you guys a movie so you can hear what's going on with it when it starts.

Post by **soundmonkey** » Tue Jan 13, 2009 10:08 pm

So far so good! Not one problem out of it. I only ended up using 2 out of the 3 wires from the RB coil harness. The 3rd wire is just an extra ground. It's marked E on the RB coils. I guess all it did was bond the grounds between all 6 coils but that mesh i used obviously does the same thing. Hope it helped. I'll try an get that video here soon.

Post by **SullivanRacing06** » Wed Jan 14, 2009 9:14 pm

nice!

Post by **BoostFab** » Thu Jan 15, 2009 10:11 am

that's quite creative... thumbs up.

Post by **soundmonkey** » Sun Jan 18, 2009 7:17 pm

Yeah and way cheaper as well!

Coils i used on my RB20det.

Coils i used on my RB20det.

Re: Coils i used on my RB20det. (soundmonkey)

Re: Coils i used on my RB20det. (soundmonkey)

Re: Coils i used on my RB20det. (fast_s14)

Re: Coils i used on my RB20det. (soundmonkey)

Re: Coils i used on my RB20det. (soundmonkey)

Re: Coils i used on my RB20det. (soundmonkey)

Re: Coils i used on my RB20det. (KC240RB)

Re: Coils i used on my RB20det. (soundmonkey)

Re: Coils i used on my RB20det. (240z4u)

Re: Coils i used on my RB20det. (soundmonkey)

Re: Coils i used on my RB20det. (Yellow4g63)

Re: Coils i used on my RB20det. (soundmonkey)

Re: (BoostFab)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums