Code P0733 A/T 3RD Signal

[96'er]

I noticed my engine check light on so I took it over to AZone to find out what is going on and the ODBCII threw the following error code P0733 A/T 3RD Signal. I did a search and did not get anything back regarding this code.

Has anyone else had this code? And where is the FSM located again on this site so I can troubleshoot the problem.

Thanks.

[maxnix]

http://www.nicoclub.com/FSM/Q45/

[96'er]

Thanks Maxnix!

[96'er]

Interesting, I just looked through the Electrical Section (EC) in the FSM and found no P0733 code. There is a P0605, P0705 and then a P1120.

Anybody have any ideas? Maxnix?

[96'er]

Found the code and diagnosis in the AT section.

[96Qowner]

Yep ... page AT-18

Improper shifting into 3rd gear. There's an AT self-diag procedure. I'd be thinking about electrical connections - might want to check the harness connector to the transmission under the car.

[maxnix]

Look for ATF coming down the wire on the driver's side. If saturated, bad turbine speed sensor, which is not inexpensive to repair.