clutches??

[240sxcl50]

i need a clutch mine just went can anyone tell me if a six puck or just a stage 3 is better and what the characteristics are?

[EnjoiNismo]

Most of the time when people put in stage 3, six puck clutches its usually a over kill.
Like those stock hondas with a six puck clutch, kinda useless if you ask me.
Is the motor stock? What type of motor?

[240sxcl50]

its a ka stock but if i fool around drifting would a stage 1 or 2 go out

[EnjoiNismo]

I had a stock KA and replaced the clutch with a OEM exedy clutch and drifted the piss out of it for about 20,000 miles.
Then sold the motor and the guy kept using the same clutch and works fine, no slipping.

So no a stage 1 or 2 will not go out sir.

[bersh240]

why not an oe replacement?
easy to drive, reliable, doesnt cost $$$$$$

edit
poo you beat me.

[EnjoiNismo]

http://www.frsport.com/Exedy-OEM-Comple ... 12738.html

Assuming its a dual cam

[Gabes13]

Yeah. the organic exedy clutch is really cheap. I just found out I had one on my ka. The pedal feel is a lot more aggressive than stock but not over kill. Really sporty actually. Perfect for the very little power a stock/mildly modded ka puts down.

[240sxcl50]

yes its a dual cam s14 i just dont wan buy another clutch till i swap i pretty much use it to slide around a little every night with my buddies

[Dittoz7]

Going Luk since I've heard they're a bit stiffer then Exedy.

[krash]

I have a Luk and I love it

[240sxcl50]

what is a luk

[OutToWinPAHC]

Spec + series are as grippy but more streetable. I would do a 2+ or 3+

[asoomal]

ACT Street Disc with Xtreme pressure plate

Or

RB20 Flywheel with 350Z ACT Street with Xtreme plate.

[240sxcl50]

did the spec stage 3 cause it was same price as 2 and only 40 more than 1.

[240sxcl50]

Ok so i got the stage 3 and when we were putting it in we realized the throwout bearing they gave me was a little bigger. Now when my car is in neutral or any gear i whines realy bad (but not after you drive it about 5 miles). We adjusted the clutch put a new mastercylinder in and its still doing it. So one of my friends came over last night and said its probly the throwout bearing that came with it. If anyone knows what this is Please let me know i feel like an idiot when i leave work cause everyone stares.

[troskinatior]

Its the thingy you put on the input shaft of the transmission

[Dittoz7]

It's that little round spinning silver thing that came with the clutch.

Also let them stare...

[240sxcl50]

Its the thingy you put on the input shaft of the transmission

uhhh what? are you talking about the pilot bearing?

[troskinatior]

No the piolt bearing is that tiny little circle peice of metal. The throwout bearing is what ditto said

[240sxcl50]

yeah i thought he was desribing the pilot bearing