clutch trouble

[zenki_myles]

ok so about 2 months ago i changed my clutch. after starting up the car it was difficult to put it into gear. when the car was in 1st gear with the clutch fully down the car would slowly creep forward. also the clutch enguages at one point i've tried adjusting it at the master cylinder but it does nothing at all.

now in trying to fix this problem i've replaced the master cylinder got a steel braded line, i never had a clutch damper/ block, and i got a new slave cylinder and it still hasnt fixed the problem.

i did buy a ebay clutch and resurfaced my flywheel myself and im pretty sure that i installed everything right. i just have no idea what the problem could be any help woudl be appreciated.

myles,

[zenki_myles]

anyone have any idea what the problem could be im pretty despirate and have searched everything. i've never even heard of someone having a problem similar to this

thanks

[Lopin18]

well ur clearly not disengaging the clutch all the way, bleed the system, and the pedal seems to be misadjusted, that hapenned to me many times, i had to pump the pedal a lot to get pressure again and be able to shift, and the car would start moving when in a stop if i had a gear and clutch in......

Bleed, and adjust, or ull regret it..... my clutch or slave cyl or something went bad and now im on foot until i figure it out...

[ka240sx1992]

either bleed it alot more or you might have put the clutch disk in backwards which happened to me one time and it did exactly what your describing. Hopefully its just a line that needs bleeded