Clutch

[ri120]

i just pulled my motor out, and i noticed my flywheel was cracked and had a lot of heat checks in it. i was looking around at hwere to buy a newflwheel and clutch, but i cant really find much. just wondering if anyone knows somewhere where i could get them. also someone told me its the same as the dual cam ka's and possibly the sr's. thanks ryan

[fluent]

JUN and some other companies I can't think of at this time still make new CA18DET lightened flywheels.

http://horsepowerinabox.com/HP...1.htmIs listing an Xtreme one. Could be matched with an Xtreme clutch.

RE: Standard flywheel... No idea where to get one apart from wreckers or Nissan and both will charge you a small fortune.

[sideways danny]

just have the standard flywheel re-faced and maybe lightened

[ri120]

ok ill call around, see what i can find out, no one knows if one off another type of motor would fit tho.thanks ryan

[ca18datsun510]

resurfacing wont help if its cracked.

look into a flywheel from 86 or so s12 200sx with with ca18et. i know the clutch works, flywheel should as well.

[float_6969]

Yea, the CA18ET flywheel should work.

[Bwana]

I have a pretty decent stock flywheel setting in the shop, need resurfaced but otherwise fine. Shoot me an email if you're interested.

[jt15833]

it seems like getting an SR flywheel is the easiest solution if you can get a new starter and clutch. (unless CA and SR clutches are interchangeable)

[mod_mastaz]

The CA18ET flywheel is a 5bolt pattern I believe. A few people on club s12 has report e/et and de/det flywheel differences.

[float_6969]

I didn't know that. I'd heard it rumored, but haven't ever seen one side-by-side.

You can use an SR flywheel, but you've got to get an SR clutch, and use a hitachi gear reduction starter from an S12.

[RS12Turbo]

I didn't know that. I'd heard it rumored, but haven't ever seen one side-by-side.

Yep, they are indeed different. Here is a pic of a ca18et flywheel from parts America.....



I can take a look at my ca18et flywheel to confirm the bolt pattern/ holes.....as it's been a while, but I do remember it had a different number of bolt holes than the ca-det

[ca18datsun510]

i see......

6 bolts.

[float_6969]

Yea the CA18DE(T) is an 8 bolt.

I'm surprised that they changed the crank from the ET to the DE(T).

[ca18datsun510]

yeah.

well if you cant get one, let me know.

as a last resort ill pull one off and extra engine.

[psilocyben]

http://www.driftworks.com/cata....html