clutch problems, please help!

ONLY for ADVANCED technical discussion about the 240sx!
stevejames3
Posts: 258
Joined: Thu Dec 16, 2004 3:07 am
Car: 92 nissan 240

Post

in a nutshell, im driving around and my 92 s13 is shifting rough, finally check the fluid and its low. it decides not to shift at all anymore(when the car is off it shift, or i could kinda throw it into gear, but cant even do that anymore(only to get it home),not much help haha) so i change my slave cyl. and bleed for god knows how long. doesnt do anything. so i get a master cly. bleed and adjust clutch. shifts on the test drive but battery was going bad and its cold so i let it run for a little bit and when i went to park it it shifts rough again and when i get it off the cement i notice $1.99 worth of dot3 brake fluid on the driveway. seems to be coming from the slave cyl. area. all i can do now is take the slave cyl off and put it back on and see if something wasent tight or if its leaking somewhere. any suggestions on what could be wrong, or certain things to check out or anything. thanks for your time.


DeeZNuTTss
Posts: 95
Joined: Tue Apr 22, 2003 2:13 pm
Car: 240sx 4/1991 hatchback s13

Post

Make sure there fluid in the resivor. Look Under the dash. behind the clutch it connects to a rod. push in the pedal. where the rod goes through the firewall there you might see fluid coming out if so. theres your problem.


Return to “240SX Technical Forum”