Clutch Problem

[JDMrida]

I am having a problem with my clutch. When I turn my car on, I cant get into gear. When I press in the clutch, it stays in... What is the problem? This is a 1992 240sxThanks

[MaximA32]

You need to check your slave cylinder fluid level. If the level is fine, you may have air stuck in the system and you will need to bleed it out.

[scottydog]

Check for fluid leaks. The master will leak onto the driver side floorboard. the slave is on the passenger side of the transmission, look under the rubber cover for fluid. Consider changing out both master/slave, as they are cheap. Dump that crap dampener gizmo near the slave. refill/bleed and you should be good to go. $50 and 2-3 hr job.

[rgrgrgeg]

i saw your profile, .one day i noticed the clu. mastr cyl. empty and filled it and i went on my day.later i noticed a leak on the clu hydr hose replaced it need i had problems.i have no play on the clu pedal.today i got the slave clu. no luck.when i was bleeding it i noticed when pumping the pedal it got hard a(alittle) then bleed and got no play it seems its losing pressure somewhere.i checked everything and i know i can do it. its a pain in a a**.i think its the cluch master.i dont noticed any leaks on the master.p.s. the transmis was working prior.know i cant put in any gear.i say no.please help e here.thanks.....rg

[rgrgrgeg]

today i just changed the master cly yestrdy a new slave cl.it does little change.i used 1 full bottle.i hope its not the clu.i noticed while pumping it has movement and bleed it loss iunderstand.it builds up pressure a i turn on car it loses its pressure..

[MaximA32]

Do a search for "clutch damper" as I have an old write-up that should come up and should take most of your issues away.

[BrianV8]

check your slave cylinder for leaks