CLUTCH PROBLEM!!!!

[240sxOwner]

My clutch has been acting up ever since i swapped my KAT into my 240. I come out in the morning ans the clutch is real soft.....after pumping and forcing it into gear it finally starts to move. After just a few minutes of drving...the cluth has no more play...it is hard as a rock. After about 5 more minutes the clutch has adjusted itself so much that my clutch starts to slip. I have bleed the clutch some more and i didn't see any air come out....and i have same problem? Is my master cylinder bad? Please help this is very annoying.

[240sxOwner]

just replaced the master cylinder, then bled the system again. Now it is so bad that with the pedal adjusted all the way out i had to literally use 2 hands to force the car into gear. HELP!!!

[rogoman]

Did you bench bleed the new master cylinder? Also the problem may be that the hydraulic fluid is somehow getting heated up during engine operation; maybe the line is real close to the turbo or exhaust.

[240sxOwner]

well it came out of my junked 240...but yes i tested it before i put it in. It is not close to the turbo nor the exhaust...but a possibility i guess