Clutch Pedal Sticking Please Help!!

[pumps2rumps]

Not sure what's going on, but for some reason while I'm driving my clutch pedal will hit a point where the pedal will be pulled down to the floor. I thought my spring was upside down and flipped it, but the same problem still arose. I will have to reach down grab the pedal and pull it back up and drive until it happens again. Not sure why this is happening?! Does anyone have a clue what's going on? Please any input would be greatly appreciated. Oh by the way just in case this matters I just had a sr20det installed and a automatic to manual swap.

[p00t]

did u get your master and slave cylinders new or used? definately check the slave cylinder out for leaks if its still the old one that was on the transmission before

sounds like your losing pressure in the line?

[SloS13]

I agree. First, bleed your system (which you shouldnt HAVE to do), making sure all of your fittings are good. If this doesnt help, i'd replace both cylinders.

[574-240sx]

I did my auto to manual swap and needed to by a new slave cylinder and rebuild my clutch master. A new slave runs less than $20.00 from advanced auto and a clutch master rebuild kit costs about $11.00 from advanced auto. It soundn't take you more than a hour to change them out, rebuild the clutch master, and bleed the system. Nick