clutch pedal goes to floor

[jam1231]

like i said the clutch pedal goes to the floor i check pior post and change the slave cylinder (sc) and master cylinder (mc) bleed it at the master cyclinder did not help, while i was bleeding it i notice the slave acuator was moving but did not have enough pressure to push in the clutch in. the only thing else i saw in that system was a block with a line going from the mc to a block and on the other side of the block a line going the the sc and another port with something thats looks like a bleed screw (what is this block called) 1992 240sx

[zeause]

thats the clutch dampener, a lot of ppl just bypass it. Try bleeding the slave cylinder.

[StryfeS13]

Just curious, do you live in Fresno, CA?

My friend just traded his hatch and the guy he traded it to is saying the clutch pedal sticks.

[OutToWinPAHC]

Sometimes you just gotta bleed and bleed.

[jam1231]

no jersey

[kc240guy]

try pumping the slave cylinder itself just by going down there and squeezing it, that seemed to help me get fluid down to it. I also bypassed the damper.