clutch line

[bytchezs13]

1991 s13 ................................i was thinking if i cld just put my line from the clutch master cylinder straight to the clutch slave instead of clutch maste to the box looking thing with a bleeder valve then to the slave, any advise

[ricebike]

http://www.nicoclub.com/articles.php?id=251959

or you can buy a whole new braided hose that does the same thing-link the master cylinder directly to the slave cylinder- if you eff up the bending process and kink the original line; i'll let you google that part

[Salem240]

Umm.. yes, I bought a braided conversion line for mine. It runs straight from the master cyl to the slave cyl . And your slave cyl has a bleeder valve on it .

[bytchezs13]

wha

Umm.. yes, I bought a braided conversion line for mine. It runs straight from the master cyl to the slave cyl . And your slave cyl has a bleeder valve on it .

i did was u cut the bleeder line on the clutch box and i hammered it down and bend it works just fine tanks any way

[Salem240]

^^^^^^Ooops.... auto to manual swap for my S14.