Hi. I have pulled my clutch and my truck has the 1 inch 24 spline clutch disc. The dealer has NO means of even searching for this. I have the O.G. part number which is 30100 14801. The newer part number is 30100 28600. The part number for the 20 spline is 30100 10606 which is the newest. I have seen some places that advertise a clutch 7 7/8" diameter, 1 inch spline I.D. with 24 splines, that fits 200SX, 1500, 1600, 1300 engines, 510,etc., that looks like it would work, but I'm not sure. Running out of options, and was hoping someone could at leat tell me what WILL work. My truck is 118K ALL original, 1300 engine, 4 speed, no rust except for surface and a couple of pinholes in floors I really want to get this thing going again. Thanks, Joe.

I used an extra organic clutch disc I had from a '69 roadster because I use a kevlar clutch in the roadster. The disc can be purchased from roadster vendors for around $60 or if you are patient you can find one on EVILBAY! I have a couple of used ones which appear to have most all of the friction material on them.

Here:http://www.datsunroadster.com/...h.htmo ... ts....html

It's black now!http://www.flickr.com/photos/1...43125/

Modified by srl311too at 5:43 PM 3/18/2009
Modified by srl311too at 5:47 PM 3/18/2009

Try part number 30100-U5100 which supercedes to 30100-N8488. That's what I have for a 10/66 and up 520. That would be the same disc used on the 411, 510, 610, 710, late 520, 521, 620, and SPL/SRL 311. 7 7/8" OD, 24 spline.