Cluster gauge problems lights cel stays on

[burnin240sx]

I just took apart my entire dash to change out my heater core. btw i wish replacing the heater core on no one.

I pluged my cluster back in and the CEL stays on even when car is off.I filler her back up with coolant and start the car. NON of the gauges work and my gas gauge it tacked out past F.

I have no clue what is wrong I am baffeled. There was no issue with my cluster before and the connectors only go in one way.

this is a 93 se with DOHC. I pluged up all the dash harness connections and can not see anything not pluged in. PLEASE HELP

I also noticed that the clock does not come on. but it is very dim and seams to pulsate Stephen-

[burnin240sx]

ok stupid me. make sure you plug the connectors in the correct spot. black goes behind the temp gauge and white behind the gas. I love when i've been working on a car for 8 hours and you get stumped by your own stupitdy. then you come back 2 hours later and go DUH I"M A RETARD.

I hope this helps someone in the future.