Clocking turbo help asap.
Clocking turbo help asap.
I just got the snap ring off of my SR T25, the compressor housing moved freely shes a newer turbo wasnt heated up too much to make it hard to turn or anything, overall was a pretty easy job...but my question is...my actuator arm is at a slight angle now..it still opens the gate fine because i can push it and it opens the gate like it should, moves freely and all...do you think the slight angle will hurt anything?
-
float_6969
- Moderator
- Posts: 17366
- Joined: Mon Aug 26, 2002 1:55 pm
- Car: CA18DET swapped 1995 Nissan 240sx (too many mods to list)
2015 SV Leaf w/QC & Bose (daily) - Location: Topeka, Kansas
- Contact:
Re: Clocking turbo help asap. (Logan76)
As long as the arm isn't contacting the opening in the actuator body, it should be fine. I never had any problems with mine anyway...
Re: (Logan76)
that'll be fine. The other nice side effect will be that you are 'preloading' the wastegate valve, and will have a small increase in boost too.