Clear Third Brake Light?

[I972OPELGT]

Ok, so I was wondering if anyone knows if a clear third brake light has been made for the factory spoiler. I have swapped my tail lights out for the clear and red aftermarket ones, and now my third brake light lens looks dowdy and faded compared to the new lights.

[wmdavis007]

I'm pretty sure there isn't one available. You can do what I did and take the third brake light out and polish up the plastic lens really good with some 3M plastic cleaner/polish (you can get it at your local auto parts store). I used my dremel tool with a felt tip to really buff it up good. Mine looked really dull but now shines like new.

[94_240sx]

I thought about doing this. This is the best picture I can find at the moment. You can buy Lexan plastic from Home Depot and a 3rd brake light from junkyard, cut and modify. Lexan plastic looks something like this. You can use red bulb or LED after it's done. It's a small part, but can add subtle touch to vert. I think it'll look pretty sweet on white or black vert.

[wmdavis007]

You could "frost" the Lexan by sanding one side...make sure you put this side on the inside...or you could just get a cheap flat clear tail light lens and just trace the old third brake light on it and cut it out. Then a little plastic welding/epoxy/glue and you have a clear third brake light. Your right, this would really look nice on a white or black vert.

[94_240sx]

Just finished. Write up coming soon.

[110octane]

DAMN! Looks sweet!!!!

[bluejay]

Well done!!!

[cmkelly]

Please tell us that was easy/cheap to do!

[hlopez240sx007]

hey 94_240sx do you have the part#S to lexen plastic if so can you email me those # [email protected] p/s that looks hella clean!!!!!! thanks hector! look forward to your post how to do it!!!!!!! good job!!!!

[-RJ-]

its been 4 months.....

WRITE UP!! lol