Chrome Body Side Molding

[clev]

Can someone tell me where to find the chrome side molding that fits in the groove along the bottom of the doors? I'm finding molding that sticks below the groove, but want it to look like the factory chrome in the groove. Thanks.

[clev]

I don't know why, but for some reason, I can't get answers to my questions. Have I angered all of the board members for some unknown reason? I have different questions posted on at least 3 separate threads and nothing. If I've done something, or posted something, please let me know. I'm a member of the Honda Goldwing board, the Ford E-350 Super Duty board, and the Ford F-350 Super Duty board, and when a question is posted, there are usually numerous answers within a couple of hours. But here, I'm getting nothing. I know that some of you have purchased the body side moldings for your cars. Why won't someone post where they got them?

[ImStricken06]

its been kinda slow here the past few weeks. dont take offense buddy id say the chrome molding could be found at your local dealer. idk anyone who sells that.

[clev]

Thanks. Yes, I found it at the dealer, but it's high dollar. I was hoping for some after market leads.

[Rogue One]

its been kinda slow here the past few weeks. dont take offense buddy id say the chrome molding could be found at your local dealer. idk anyone who sells that.

I checked Courtesy Parts and found some info, but it's a little hard to read. http://www.courtesyparts.com/-c-7712_77 ... _7894.html

Part numbers appear to be as follows:
Front door: 80872 (RH), 80873 (LH)
Rear door: 82872 (RH), 82873 (LH)



You should be able to have your local dealership order these for you, but I dunno what they'll charge for them. I did a quick ebay search "Chrome Side Body Door Molding", and it returned quite a number of results, ranging anywhere from under $30 to well over $100. On the plus side these are easy to install, although I'd wait until warmer weather.

[clev]

Thanks, Rogue. I found some on e-bay, but the one's I found fit below the groove. I'll check your link.

[Qashqai]

You get what you pay for. OEM is expensive but high quality. The chrome coating of the aftermarket will peel after one winter. In that case, since you used a high quality 3M double sided tape, that will be a nightmare to remove it.

If I were you, I would invest on a high quality OEM trim piece.

[clev]

Good point, oash; I'll probably follow that advice.

[Leo2005]

In that case, since you used a high quality 3M double sided tape, that will be a nightmare to remove it.

That is the only way to install them. It's been discussed earlier many times. 08-10 Rogue never had any kind of moldings and moldings for 11-13 +14(Select) are having plastic clips which means doors have holes for those clips.