cheap...Racing Clutches and Billet flywheel

[Anand]

Hello everyone,

I know someone who have been making racing clutches for 300z and now want to start making them for our beloved 240's.

These are special made clutches so let me know who would be interested and we can set up some kind of group buy or something. here is what they have...

Stage Foot Lbs of Torque Price Comments1 267 $289 2 267 $369 This disc has a steel backing upgrade over the stage 1 kit3 340 $314 6 puck rigid disc3 340 $334 6 puck spring disc4 400 $464

these are the prices as of right now. He said that once we know how many people are interested, he will give a discounted price on these.. to be honest with you, I don't know how they feel or hold up but I know the person who is making these and he would not screw people over...

post up if you are interested in these...

brand new BilletAluminum flywheels for the 240SX. They weight approx.8.5 lbs and the cost is $375 each.

[Anand]

anyone????

[Exar-Kun]

my ACT six puck sprug clutch was almost indentical to that one..once I wear it out I may be interestied. included the release bearing and such?-chet

[rousie13]

I just replaced my clutch like two weeks ago. When that goes or I get a lil hp out of my engine, I'd be interested.

[Thee 240sx Owner]

I'm interested.. Let me know when they are available and what all they include in it

[Anand]

I'll find out what it includes... and he also has brand new BilletAluminum flywheels for the 240SX. They weight approx.8.5 lbs and the cost is $375 each.

[Anand]

All the kits come with the disc, pressure plate, pilotbearing (if it needs it), release bearing, andalignment tool.

[Anand]

...

[twlnbro69]

In intrested in both a clutch and a flywheel

Chris

[Anand]

In intrested in both a clutch and a flywheel

Chris

e-mail me @ [email protected]

tell me what you need and I will get back to you...

[stutt944]

8.5 lb flyhweel, eh? all other aftermarket flywheels ive seen weigh in at about 11 to 11.5 lbs. whats the general rule for weight reduction = hp gain? isnt it like 1 lb reduced rotating mass = 1 hp? or more?

but sorry i'm not in the market for either of these right now. good luck.

[TurboKA37]

i might be intersted if u can get a decent deal. i will be adding a turbo kit by the end of this year(still deciding if i should wait for WD's kit) and ill need a new clutch to handle the power. im also interested in that flywheel, only 8.5 lbs.?? thats really light. if u cant get a group buy or sumthin going i might as well wait a few more months and watch for any deals that come by.

[Anand]

yea, the more people that actually commit to buying it, I cna get the price down low... The only way I can get the final price is to get a final number of people that want to buy it...

[TurboKA37]

how low do u think u could get the prices to go? i was thinking i might only get the flywheel for now

[Anand]

dunno.. I can ask.. have no idea. If you are interested in the flywheel. I can ask and if you are the only one. I can see what price he can get for you..

e-mail me your info and I will find out for you

[TurboKA37]

How bout we get some more ppl in this!! come on guys 8.5 lbs. for a flywheel!! thats awsome! im ordering mine once black240 give me a final price. how bout we get more people so we can possibly lower the price

[Nismo_Freak]

8.5 lbs. is too light of a flywheel for the KA IMHO.

[stutt944]

i think i'm with ya. i even kinda liked the heavy stock one best. if it wasnt so weak i mean.

[TurboKA37]

whats wrong with a light flywheel?

[stutt944]

depends on the driver, really. the lighter the flywheel, the quicker the engine tends to rev up, and consequently rev down. i prefer the revs to be somewhat more predictable and "fool-proof" in a way.

[Anand]

come on guys.. buy these.. this guy is just starting out so he's not making any real money off it. but if his business takes off and people buy, he is willing to be a soponsor for NICO...