Cheap Fmic?

Post by **PROJECTRB240SX** » Fri Jun 20, 2003 9:03 am

ARE THERE ANY CHEAP FMICS? LIKE $300 OR LESS? IS ANYONE SELLING ONE? I WANT A BETTER INTERCOOLER BUT I AM ALSO TRYING TO SAVE FOR THE TRUST TURBO UPGRADE AND MANIFOLD.

Post by **mickee** » Fri Jun 20, 2003 9:03 am

ummm i can maybe hook you up for 350shipped???

28x8x3.25 this is a no brand... its a side to side HKS style Endtanks.... i will have to talk to my distributer if there are any instock???

Post by **PROJECTRB240SX** » Fri Jun 20, 2003 9:03 am

$350 SHIPPED SOUNDS GOOD, WILL THAT BE WITH PRE WELDED END TANKS? THATS LIKE WHEEL TO WHEEL STYLE RIGHT?

Post by **mickee** » Fri Jun 20, 2003 9:03 am

yes it is welded.... umm let me show you an example...

thats an old one i had... i think that size is sorta perfect for 240's but im not quite sure.... (PIGNOSE)

Post by **PROJECTRB240SX** » Fri Jun 20, 2003 9:03 am

WELL SEE WHAT YOU CAN DO.

Post by **spec-v5150** » Fri Jun 20, 2003 9:03 am

ebay

some guy is always selling FMIC's for $275. I don't know fitment as I havn't looked into it. FMIC I can wait, I want a running car first

Post by **Nathan** » Fri Jun 20, 2003 9:03 am

I've been looking around ebay...almost snagged a nice one tonight actually. Is that a tube and fin design mickee? is it pressure tested?

Post by **mickee** » Fri Jun 20, 2003 9:03 am

Yes its a tube and fin... did you really think you can get a BAR and PLATE design for that cheap??? shoot the lowest ive seen for a bar and plate was like 500.....

pressure tested and the flow rate is 640... which is good up to 430 hp.... this is what ive been told by the maker....

Post by **Nathan** » Fri Jun 20, 2003 9:03 am

I've seen Bar and Plates on ebay for that cheap (the one I was bidding on went for 355) I dont have a huge preference between the two and the one you have access to is larger and about the right size to be maybe just a tiny bit oversized but give me a little room to grow. So 350 shipped eh? Are these all custom utilizing cores from a different manufacturer with just some end tanks welded on, or are they made by a particular company?

Post by **mickee** » Fri Jun 20, 2003 9:03 am

umm i was told a company from Philly made the CORE.... and then the shop i deal with make his own endtanks.....

this is no robotig.... so it isnt flawless i will tell you right out so if/when you do order you will see some burnt marks becuase it is hard to clean....

There is no leaks or any complaints from the 20 that ive sold from the past 6 months or so....

ANd i dunno if i said it already but this endtanks seems to be an HKS style endtanks....

also in the picture ive provided the fins was not stretched all the way to the ends..... since then it has been streched all the way and efficiency was improved.. although it havent been pressured tested with the new design....

i forgot to mention.... that the piping utilizes 2.25..... 2.50 will just be too big for it....

Post by **Nathan** » Fri Jun 20, 2003 9:03 am

Oh, burnt marks dont matter, I'm not picky about looks AT ALL. I'm trying to figure out what size the stock RB25DET throttle body is...if it's 2.25 or smaller then I dont have a problem with 2.25 inlets and outlets.

Post by **mickee** » Fri Jun 20, 2003 9:03 am

Well I just talked to my guy and he said its 375... sorry for the 25 increase... i dont know why... thats still pretty cheap SHIP....

so if anyone of you guys are interested let me know so i can put an order ....

2day shipping with confirmation for your convience adn fast delivery..... and if you need any vouch askl some of the local SOCAL.... YESWEPROMISE isnt too far and know where I live... also BLACK240 who is an ADMIN knows where I live... so there are no worries...

Post by **Nathan** » Fri Jun 20, 2003 9:03 am

Allright, well I'll strongly consider it but it'll have to wait until the motor gets here so I can see about what might need replacing on it

I'll e-mail you a definite yes or no when the motor gets here and I get to take a good look at it

Post by **mickee** » Fri Jun 20, 2003 9:03 am

no problem....

Post by **apex_7** » Fri Jun 20, 2003 9:03 am

$25 increase! Nevermind. j/k

Post by **keepingthe240** » Fri Jun 20, 2003 9:03 am

Is the starion/conquest a good low-cost intercooler??? Is it big enough and free flowing enough for 15+ psi on a rb/ka24de??? Any (stock)intercooler i should be looking for that i can find on ebay???? The flow charts on the saab/volvo look like they would be the worst intercooler to get.....anyway to get them to flow better???

Post by **Nathan** » Fri Jun 20, 2003 9:03 am

The starion is really quite a tiny IC...look in the direction of an Isuzu NPR if you are looking for a cheap junkyard ic

Post by **mickee** » Fri Jun 20, 2003 9:03 am

JUNKYARD IC are okay for low and minimum boost... just to cool stuff...

its okay for a just-for-now-dont-boost-dont-go-to-fast INTERCOOLER

Post by **mickee** » Fri Jun 20, 2003 9:03 am

so are any of you people interested???

Post by **Bryson** » Fri Jun 20, 2003 9:03 am

I might be mickee. Like Nathan said when my clip gets here I need to see what costs are gonna show up to get it in, I really do want to lean towards an FMIC instead of ****in with the stock side mount

Post by **mickee** » Fri Jun 20, 2003 9:03 am

okay jsut let me know so i know if i need to stock some or call my reference to see if the endtanks are available... jsut let me know....

Post by **PROJECTRB240SX** » Fri Jun 20, 2003 9:03 am

CAN YOU DO STARION STYLE END TANKS? IF NOT THATS COOL. I MAYBE GETTING IN CONTACT WITH YOU SOON, IF VENUS SUPPLIES ME WITH ANOTHER ENGINE OR REPAIR PARTS WHICH FROM THE LOOKS OF IT IS GOING TO COST ALOT.

Post by **mickee** » Fri Jun 20, 2003 9:03 am

unfortunately i cannot... if i could i would offered many different ones... i would be glad to make different but the skills still lack... lol i apologize for this.....

for anyone is interested let me know.....

Post by **PROJECTRB240SX** » Fri Jun 20, 2003 9:03 am

THAT IS OK. I WAS JUST ASKING. I MAY BE CONTACTING YOU STILL THOUGH.

Post by **mickee** » Fri Jun 20, 2003 9:03 am

thanks for understanding... later guys..... if you guys need to contact me

AIM: DAHOGFLYSHYPNOY... im always online... unless at school or working on car/shows....

Cheap Fmic?

Cheap Fmic?

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums