Chassis badly beaten and abused.

[240ChukiSX]

I bought a 92 240 hatchback about half a year ago. I knew that this car was a drift car and was abused stupid crazy when I got it. The low ball joints were torn and flimsy, I couldn't even get a proper alignment becuz supposedly, something was wrong with my camber and control arms. I recently replaced my inner tie rods, and rack and pinion boots. I know I need some low ball joints and rack and pinion bushings. Can somebody tell me what else I should replace completely to make sure that this car is no longer crippled? It's been beaten very bad and I want to make the best outta her. Any input will be very much appreciated by both me and my car!

[sx moneypit]

Go ahead and replace the lower control arms,that way you take care of the ball joints and the bushings at the same time.(It's a lot easier too!)Check your struts and strut mounts also.

[240ChukiSX]

Strut mounts were replaced as well. Sorry forgot to mention that. So, lower control arms as well. Okay, sounds good. Will do! THNX!

[sx moneypit]

No problem.Check your outer tie rod ends too.