Post by
thursdaymike »
https://forums.nicoclub.com/thursdaymike-u65008.html
Tue Jan 12, 2010 9:29 am
RB20 motorFirst off great wite up on wiring. However, my wiring seems a little different. U say there is two big plugs on the rb harness, but i could only find one. The blk/pink wire was on a smaller plug close to the ecu plug. I dunno if i have a cefiro motor and that is why the wiring is different. Anyways to the point. There a re a few wires i need to locate.
Black/Yellow Black/White (Thick wire)White/Red White/Red (Thin wire)FB White White/Purple (Thick wire)Alt. White/Blue Terminal (V.Thick wire)
i have found the ka harness sides of course, but the rb side is giving me trouble. If you tell me what they are used for i could trace them back from a ecu pinout to find where they are in the rb harness. Any help would be greatly appreciated. thanx