Car wont start dont know what to do????

ONLY for ADVANCED technical discussion about the 240sx!
seedubau
Posts: 4
Joined: Thu Feb 07, 2008 6:24 pm
Car: 89 240sx Fastback

Post

I have a 89 240 with a dual cam swapped in. It drove fine for a couple months then one morning I came to start it and nothing. The solenoids not clicking and the battery is fine I even put a brand new one in just to test it. I dont think its the alt because it wont even attempt to crank over. Im pretty sure its electrical I dont see how it could have siezed but Im not exactly sure what to look for.

Any suggestions btw I have an electrical tester but I dont really know what to check.

Thanks


ReX2SX
Posts: 97
Joined: Tue Dec 16, 2008 6:38 pm
Car: 240sx

Post

If you can turn the crank then its not siezed.

Check to see if your fuses and relays are good. Then check and make sure your getting voltage to your starter.

User avatar
spank044
Posts: 518
Joined: Sat Apr 29, 2006 3:56 am
Car: 1992 240sx with a Supercharged 350Z VQ for a HEART!

Post

Touch a screwdriver between the positive post on the starter and the solenoid. If it cranks then it is your relay or maybe your key switch. If ti doesn't crank, then your fuse it blown or the starter is bad.


Return to “240SX Technical Forum”