Car won't rev up

ONLY for ADVANCED technical discussion about the 240sx!
konaboi808
Posts: 2
Joined: Sun Sep 07, 2014 4:07 pm
Car: 1991 240SX SE

Post

Ok. So I picked up a project. 91 SE. When I got it the wiring was laid but not all connected. Hoses weren't connected car didn't run. Started to play with it. Got it to idle but once I press the gas it will almost die or it will die. Played with the timing n for the most part is on point. Dizzy kicked my a** for a while n wouldn't start. Now it starts idles up a lil to about 800 than sslowly drops down. Get to the point where it sputters n pops at a low rough idle then dies. New cap n roter. Any ideas or test points please.


User avatar
2_Liter_Turbo
Posts: 2674
Joined: Sat Jan 24, 2004 10:41 am
Car: _________________
'96 S14 Coupe: SR20VET
'90 R32 TH1 GTR: RB26DETT
'92 S13 Fastback: SR20DET
'11 V36 Sedan: VQ25HR
'06 GMT800 2500HD: LBZ Duramax
Location: DFW, Texas
Contact:

Post

Lots of possibilities. I would definitely check for missing grounds, any air/vacuum leaks in the intake system, make sure your fuel lines or not backwards, double check all hose clamps and electrical connectors, etc. It's probably something simple.

konaboi808
Posts: 2
Joined: Sun Sep 07, 2014 4:07 pm
Car: 1991 240SX SE

Post

Mahaloz. I'll check um now


Return to “240SX Technical Forum”