car leaning on one side.....WTF??

ONLY for ADVANCED technical discussion about the 240sx!
User avatar
amolao
Posts: 3777
Joined: Tue Nov 25, 2003 10:53 am
Car: 1989 Hatchback (the first one...) w/ Autech sr20de S15
Contact:

Post

By looking at the car from the rear very carefully, the car leans on the driver side. I noticed it in the past, I thought it was the struts or springs, I just replaced springs and struts and still leaning. I will try to explain it this way. The camber of the rear tires is the same, (car is lower but not much, Eibach sportlines) The fender lips are closer to the tire on the drivers side. Probably half an inch more than the passenger side. So if is not the springs or struts, can the problem be in control arms,etc???.... The car has NEVER been into an accident of any kind.....The frame is perfectly straight. Another thing is that doesnt seem to affect handling or tire wearing....But still noticeable by looking at the car.....

thanks:confused:


User avatar
Axel Grungy
Posts: 4711
Joined: Tue Jul 08, 2003 8:13 am
Car: 2001 G20 5spd
Location: Cincinnati OH

Post

mine does the same thing, not quite as much tho. ive noticed my friends 240 (lowered prokits) does the same thing. i notice it but no one else does. oh well

User avatar
allthrottlenobottle
Posts: 254
Joined: Thu Aug 28, 2003 5:18 pm
Car: 91 s13
Contact:

Post

mine does the same with no problems. sont know what it could be

User avatar
allthrottlenobottle
Posts: 254
Joined: Thu Aug 28, 2003 5:18 pm
Car: 91 s13
Contact:

Post

mine does the same with no problems. dont know what it could be

User avatar
240sxHitman
Posts: 918
Joined: Sun May 30, 2004 3:11 pm
Car: Boosted '91 240sx
Contact:

Post

mine is the same way, i notice it alil while ago. my suspension is still stock right now

gumby
Posts: 994
Joined: Wed Oct 15, 2003 6:53 pm
Car: '89 240sx sohc

Post

subframe bushings are herniated a little more on that side i suppose from the drivers weight over the years. theres a clip on kit to squeeze em back into shape. i forget where the site is though. i think its PDM racing

User avatar
amolao
Posts: 3777
Joined: Tue Nov 25, 2003 10:53 am
Car: 1989 Hatchback (the first one...) w/ Autech sr20de S15
Contact:

Post

Gumby, thats very good info, I didnt noticed the leaning until many years later since I have my car, I really want to make it right,(Im very picky and perfectionist when it comes to my ride...)

Question:Have you done this fix yourself or seem somebody fixing this by replacing the bushings, etc....??? Im not questioning you, I only want to make sure this is going to take care of it....:icesangel

Thanks

xatracing
Posts: 120
Joined: Tue Apr 15, 2003 3:44 am
Car: 240 bandit
Contact:

Post

The subframe spacers will fix it also- but be forewarned they will make your ride much harsher.

User avatar
amolao
Posts: 3777
Joined: Tue Nov 25, 2003 10:53 am
Car: 1989 Hatchback (the first one...) w/ Autech sr20de S15
Contact:

Post

Ok, are you reffering to the metal spacers??? how about getting rubber ones, how will those work compare to the metal spacers??

How many are needed?? 2 or 4??

Best ones to buy??? Im looking for good and cheap.....:) :D

xatracing
Posts: 120
Joined: Tue Apr 15, 2003 3:44 am
Car: 240 bandit
Contact:

Post

the metal ones. - T3 sells a decent set for around $75.00 - do a search on google for techno toys tuning


Return to “240SX Technical Forum”