Car is still wont cold start....Crossed all my Ts and dotted all my Is

[nismodave]

Ok.......my car will not cold start without starting fuild....

Ive checked for vacum leaks, Ive got my fuel rail hooked up correctly, I have a Walboro fuel pump, brand new 300z filter, new thermostat, tried 2 z32 mafs..........nothing....

I should note I have a Greddy intake on my 180sx blacktop in my s14.....It had the same problem withmy old intake, but it would start after many tries...

Nobody seems to have an explanation for this problem.....

#1- Due to the fact my temp sensor reads high because I have a s13 motor in a s14 (different resistance in gauge), would that effect cold start?

#2-The jokers who installed my motor first did a lousy job,and I see wires coming from the main harness not tied into the ecu. Is something missing that could be causing the what I believe is a a non choke?

Any imput would help.......

Thanks

[pampadori]

how are you using the z32 maf? are you using s-afc? i'd suggest going to stock maf until you have it running right. also, try going over the wiring again.shaun

[Samabra]

ok man what you have to do is search for the S13 SR wiring harness on here and print the diag out and then start checking. Maybe you'll turn something up Chris