Cant figure out wiring. PLEASE HELP

Discuss the RB20, RB25 and RB26 series engines.
Post Reply
User avatar
TougeChallenger
Posts: 257
Joined: Sat May 21, 2005 6:10 am
Car: 91 240SX
Location: NH

Post

I have already searched and read all the write ups on the RB20 swap into a s13. But i cant figure out if you used the power harness from the rb? there is one of the two grey plugs and it on the power/lower rb harness. im just so damn confuse

Top
User avatar
BoostFab
Posts: 3529
Joined: Wed Dec 03, 2003 8:23 am
Car: S13cp, S13fb, S14z
Location: Nismo Land
Contact:
Contact BoostFab

Post

TougeChallenger wrote:I have already searched and read all the write ups on the RB20 swap into a s13. But i cant figure out if you used the power harness from the rb? there is one of the two grey plugs and it on the power/lower rb harness. im just so damn confuse
it's call the lower harness, use the ka ones. cut off the plugs where the rb harness plugs into the rb alternator, etc. and move it to the ka lower/power harness.
Top
User avatar
Carl H
Posts: 5985
Joined: Mon Aug 04, 2003 4:09 am
Car: 1995 Nissan 240SX SE RB30DET

Post

or just swap sensors and use the ka lower...much cleaner.
Top
Post Reply

Return to “RB20DET / RB25DET / RB26DETT Forum”

Search for Nissan stuff on ebay!
Find Your Forum!

 

NICOclub's Nissan forums and Infiniti forums and all affiliated sites are the property of HDS Holdings, Inc.
They are independent publications and are not affiliated with or endorsed by Nissan or Infiniti.

Information Copyright © 2000-2026 by NICOclub, all rights reserved. Material may not be copied or reprinted without written permission.

Privacy Policy