I was attempting to see if I could clean my sending unit(waste of time btw). When I was pulling it out, the soldering on three of the four wires attached broke off. I can re-solder, but I don't know which wires attach where on that long metal piece inside. Probably should have taken a picture beforehand, but I didn't expect it to break off so easily.

Here is a picture of what I'm working with.

http://imgur.com/a/e5OmP

i haven't pulled mine out yet. but if i had to guess the green goes on the side with the white wire and the red and black on the other. im guessing based on wire bends. not soldering that back on may be a pain.