Can someone help me?

Volkslogan23: Posts: 2; Joined: Thu Oct 01, 2009 7:30 pm; Car: 1993 Nissan Hardbody

Quote

Post by Volkslogan23 » Fri Feb 12, 2010 1:39 am

I just bought a set of Chevy 16'' wheels for my hardbody. I need to know the best and safest way to get these to fit correctly... Boring the center, or wheel spacers?
Modified by Volkslogan23 at 11:24 AM 2/12/2010

Top

MinisterofDOOM: Moderator; Posts: 30928; Joined: Wed May 19, 2004 5:51 pm; Car: 1962 Corvair Monza
1961 Corvair Lakewood
1974 Unimog 404
1997 Pathfinder XE
2005 Lincoln LS8
Former:
1995 Q45t
1993 Maxima GXE
1995 Ranger XL 2.3
1984 Coupe DeVille; Location: The middle of nowhere.

Re: Can someone help me? (Volkslogan23)

Quote

Post by MinisterofDOOM » Fri Feb 12, 2010 2:19 am

I believe you'll need to machine the bore out to 4 inches.

Top

Desert Rat: Posts: 1642; Joined: Wed Jan 17, 2007 11:57 am; Car: 2014 370Z M6 Base Coupe
2017 Frontier 4.0
2007 Dodge Ram 2500 Cummins Quad Cab 4x4
1977 F150 4x4 Shorty BUILT
2008 Boulevard C90T
Previous owner of a bunch of Nissans; Location: Mesa, AZ; Contact:
Contact Desert Rat

Website

Re: Can someone help me? (MinisterofDOOM)

Quote

Post by Desert Rat » Fri Feb 12, 2010 5:10 am

Either will work.

Top

Volkslogan23: Posts: 2; Joined: Thu Oct 01, 2009 7:30 pm; Car: 1993 Nissan Hardbody

Re: Can someone help me? (Volkslogan23)

Quote

Post by Volkslogan23 » Fri Feb 12, 2010 9:32 am

I want to do it myself, because a machine shop wants way too much to do it. What should i use? And will the wheel crack later on down the road because i bored all the wheels strength out?
Modified by Volkslogan23 at 2:49 PM 2/12/2010

Top