Can I remove those thing's see pics inside.

[PulsarDet]

To make a story short I would like to remove most of the part that is not realy use on our loved CA18.

For exemple my vacum now, one vacum for the FPR, vacum for the brake, vacum for the bov and wastegate, everything for the butterfly has been remove and the hole in the intake has been fix.

The car use a stock ecu and will be use a drag car, so any vacumm idle, cooling thing that are not need will be remove but still I need idle.

Let me know what you think, thank's a lot.





When you will click on the image their is 2 line witch has been draw one red and a blue one.

[PulsarDet]

What basicly I am looking for it to know if I can use the AAC I think wish is on the intake and plug it directly before the throtthle body, and remove the whole cold start thing.

[r34 gtr]

I got rid of everything. Watch out though using the stock ecu, it will be a huge pain to start when cold. You have to retain most of the valves on the side of the intake manifold.

[PulsarDet]

On the side of the intake their is the brake booster valve, and their is a rubber line that goes from the air regulator to the intake a big rubber, I can cap it off I presume ? You can check the first pic see it quite well, and on top off that their is another big nipple what should be connected there ? After that the system for the idle that should be pretty clean. Any suggestion of thing's I can remove or it will be time for searching thing to remove on the coolant system ?