Cam setup need help

[240hatchsx]

Hey my buddy got got hold of a couple of stage 2 264/264 BC cams he had them check and found that the intake cam was no good but gave them to me instead for a few trade. Needless to say I had no use for them until now getting blown by a POS civic and not having anything to show for it I was wondering if I could put the BC exhaust cam on the exhaust side and move the stock exhaust cam over to the intake side and run a 248/264 in my stock s13 and was wondering If I would run to any problems or malfunctions with my car as this is my DD???

[compactfean]

Yes it is possible but timing the cams like that will be a real pain in the a**. You will need to take detailed pix of the cams at tdc and do your cam setup based on the pics, not the timing marks.i think you'd be better off with the 264 on the intake side anyways. Look at the older na sentra ser. Its the sr20de and uses the 248 intake cam and 240 exhaust cam.remember that the intake cam controls most of the behavior of the motor.