I just replaced both cam sensors early this month (cleared the error code right after) and having the same problem now (P0340 Cam Sensor A Circuit Bank 1). The car started acting up sunday night, but worse than before. I cleared out the error code yesterday after work and this morning it came back on, because the car didn't want to start. I haven't had time to reset the computer yet. Is there any other reason why the cam sensor code would come back on??? The car only has 93k?????
Cam sensor
Cam sensor
I just replaced both cam sensors early this month (cleared the error code right after) and having the same problem now (P0340 Cam Sensor A Circuit Bank 1). The car started acting up sunday night, but worse than before. I cleared out the error code yesterday after work and this morning it came back on, because the car didn't want to start. I haven't had time to reset the computer yet. Is there any other reason why the cam sensor code would come back on??? The car only has 93k?????-
audtatious
- Moderator
- Posts: 25014
- Joined: Sun Oct 27, 2002 5:31 pm
- Car: 2017 Q60 Red Sport. Gone: 2014 Q50s, 2008 G37s coupe, 2007 G35s Sedan, 2002 Maxima SE, 2000 Villager Estate (Quest), 1998 Quest, 1996 Sentra GXE
- Location: Stalking You
- Contact:
Re: Cam sensor
I have not run into that before so I'm not sure the troubleshooting steps.
http://www.nicoclub.com/FSM/G35/Sedan/2 ... dan/ec.pdf
Page EC-3223 goes through troubleshooting for P0340 issues. Looks to be a pain in the butt.
http://www.nicoclub.com/FSM/G35/Sedan/2 ... dan/ec.pdf
Page EC-3223 goes through troubleshooting for P0340 issues. Looks to be a pain in the butt.
-
SteveTheTech
- Posts: 3751
- Joined: Sat Aug 16, 2008 3:20 pm
- Car: 15 Nissan Sentra SR
12 Infiniti G37x Coupe
-Formerly-
05 Mazda 6 L3 Sport
95 Infiniti J30
94 Nissan D22 - Location: Chantilly, Va
Re: Cam sensor
If this happens the easiest thing to check is to tug on the connector. The connectors used then look like the might be connected but may not be fully engaged.