Calling on SneaKe

[Tampa G35 Sedan 6MT]

When are you going to do a write up on how to install the Angel Eyes?

Mine should be here next week.

If you don't post a write up Im going to do one!

If I do, I want to get a custom title of Angel Eyes J/K

Oh and thanks for showing me the ebay site for the Eyes

DJ

[SneaKe]

I'm right on top of that Rose!

Got it all here on my PC, just have to fix it up and post it. It will be in the exterior/lighting forum section. If not tonight, tomorrow for sure.

[rn79870]

Be sure to email G_whizz, Joe or Beanor and let them know you did the write up so it gets the attention it deserves and maybe even a custom title for yourself. (G_Whizz has already checked his email for this year, so probably Joe or Beanor would be a better choice)

[SneaKe]

DIY is done. Its for the 06-07 G35C.http://forums.g35club.org/zerothread/340467

I'm sure many people will enjoy seeing one for the Sedan, and you'll get your custom title, so be sure to take pictures while you work.
Modified by SneaKe at 8:36 PM 5/27/2008

[ArizonaG35]

Be sure to email G_whizz, Joe or Beanor and let them know you did the write up so it gets the attention it deserves and maybe even a custom title for yourself. (G_Whizz has already checked his email for this year, so probably Joe or Beanor would be a better choice)

Sneake earned his custom title on his 1st post! I like his work a lot and I look forward to his posts... but I really enjoy Tampa G35's posts... I think in the spirit of good will, you both should work together to make an A+ post. Combine your "infinite" knowledge to make a "Sticky worthy" post! I respect that Tampa gave Sneake the opportunity to post the "how to" first... props to Tampa for showing respect.

I look forward to both of your posts on the "how to" and I believe that our ultimate goal is to provide the best information to our "guests"... I think if you both work together, then you could come up with a "title" deserving thread. Don't make it a competition...make it a "project"...

Just my opinion...

Good luck and remember... Brotherhood forever!

Dave

[Tampa G35 Sedan 6MT]

Im with you on this one Dave...

I like the idea of a project.

Im going to take a look at what Sneake did now!

All i am waiting for is for the lights to arrive

If it wernt for Sneake I wouldn't have known about the 45 dollar halo's

DJ

[SneaKe]

Wow, that is touching. I kinda feel bad that while you were typing that, I had already posted mine.

However, his DIY will be quite different from mine, as his halo's and headlamps are very different.

I do like the idea of the SUPER DIY though!

[Tampa G35 Sedan 6MT]

I can't find the Post

It tells me I can't edit my own posts yet

[SneaKe]

That was my bad. I copied the wrong link. I fixed the one posted above, and here it is again:

http://forums.g35club.org/zerothread/340467

Its in the exterior/interior/lighting forum.

[Tampa G35 Sedan 6MT]

So far what i am reading is great! I think mine will be the same for 03-06 sedans

Great Job SneaKe

[SneaKe]

Everything should be almost the same, expect for the mounting the halo's, as yours are half circles and will be much more visable than mine, so you'll have to be much more carefull with how you mount them. I'm looking forward to seeing how you do it.

[Tampa G35 Sedan 6MT]

Im a little scared. I think i want to wire them so that they are always on! I looked at my lights just now and I don't think I have a parking other than the signal light.

I also looked at what i bought and they are full circle halos. Only a little bit of the circle is not lit up like yours. But the wires will be hiden better due to the way the light is set up. I will have to see when i take the light apart how easy it will be lol

The worst that could happen is I mess up the head lights and i have to spend 145 on new ones (ebay)

Take a look on ebay and tell me what you think!

http://cgi.ebay.com/ebaymotors...ZWDVW

DJ

[Tampa G35 Sedan 6MT]

The ebay posting also says that i don't have to squeeze that inverter into the head light. It is externaly mounted I think this is a good thing because i was worried about that. Also it looks as if the lights will have a cleaner look to them with the halos on the sedan? But who knows.

DJ

[SneaKe]

They will definately look better on the sedan or 03-05 coupe, no doubt.

You do not have to mount the ballasts inside the headlight, but you'll want to. If you mount it externally, you'll have to beak out Mr. Drill and put a hole in the back of your headlight somewhere to get the wires out, then have to seal that hole with silicon.