CA18DET parts for sale

Post by **NeedCAforS13** » Thu Jul 31, 2008 3:24 am

Whats up guys,

Hope everything's going well! The forum seems to be doing GREAT! Thats good to see... Anyways, so I was cleaning out the garage the other day making room for a new project, and found some random CA18DET parts I had layin around from forever ago in some boxes.

As most of you know I don't have my S13 anymore, so this stuff isn't doing me any good. I'll be putting it on eBay since I don't check the forums very often and its easier to get rid of stuff there. I'll be listing more stuff tonight when I get home with the camera.

CA18DET ARP Head Stud Kit. PENDING SALE

http://cgi.ebay.com/ebaymotors...20535

A general list of stuff I have that I'll be taking pictures of:CA18DET bellhousing (Use your old KA transmission on it)CA18DET Trust piping kit with SR20DET SMIC - SOLDStock CA18DET parts/sensors (not sure what exactly, gotta check)Stock CA18DET Flywheel - SOLDAlternatorsStarter - SOLDMAF (maybe?)

If anyone has requests I can dig around and see what I can find. Mostly stock stuff. I just want it gone.

Email is [email protected] although I get spam like crazy at that account and sometimes miss emails if they aren't clearly marked "not spam". Haha if that makes sense.

-Sean
Modified by NeedCAforS13 at 3:00 PM 8/4/2008

Post by **Rin5** » Thu Jul 31, 2008 4:31 am

NeedCAforS13 wrote:Stock CA18DET parts/sensors (not sure what exactly, gotta check)

im interested in what "parts/sensors" u got and do you have the lil bracket the goes on exhaust side of the engine that holds the stock hotpipe in place right above the oilstick?

tell me more what you have...im looking around for stuff and spares

Post by **NeedCAforS13** » Thu Jul 31, 2008 4:47 am

i know i don't have the hotpipe part... but I'm not sure what else i have. stuff's in boxes at home. gonna sort throught it tonight and this weekend and take pics.

Post by **Ghost_silvia** » Thu Jul 31, 2008 5:00 am

how much for the alt & starter? You never know when you'll need one.shipped to 78634

Post by **NeedCAforS13** » Thu Jul 31, 2008 5:11 am

I think I can fit both of those in the $12.95 12x12x5.5 flat rate box. If thats the case $20 each plus $15 for shipping = $55 shipped (but let me measure dimensions when I get home to verify)

Post by **The_Chosen_One** » Thu Jul 31, 2008 6:24 am

wouldnt happen to have Cam Covers and Upper Timing cover shipped to 33433

Post by **NeedCAforS13** » Thu Jul 31, 2008 6:55 am

I do, but I dunno if I want to sell them. What are they worth to you?

Post by **The_Chosen_One** » Thu Jul 31, 2008 7:09 am

To be honest not much, so far the price I've paid from members on her are $45-$60 Shipped for all 3 pieces.

I have 3 sets already that I use for cores or experimenting.

Post by **ca18detgabby** » Thu Jul 31, 2008 7:12 am

hey SEAN!

what you looking to get for the SMIC piping?

Post by **HighwayStar22** » Thu Jul 31, 2008 7:37 am

I sent you an email earlier today boss.

Post by **NeedCAforS13** » Thu Jul 31, 2008 9:05 am

The_Chosen_One wrote:To be honest not much, so far the price I've paid from members on her are $45-$60 Shipped for all 3 pieces.

I have 3 sets already that I use for cores or experimenting.

alright, how about we work out a trade. I want to powdercoat my subaru intake manifold and valve covers (2) when I pull apart the motor in afew weeks. I'll send you all 3 CA18 covers and the bare subaru manifold and 2 covers, you powdercoat them a simple dark blue color (nothing fancy, no flake or texture) and you send them back. will that work? I figure shops around here charge about $60-75 to powdercoat afew parts... let me know what you think.

Post by **NeedCAforS13** » Thu Jul 31, 2008 9:13 am

ca18detgabby wrote:hey SEAN!

what you looking to get for the SMIC piping?

you want the SR cooler too gabby? i'd rather sell it to you since you're local. shipping the top crossover pipe is gonna suck.

$120 with the cooler, $80 for the piping alone. I forgot to mention it comes with two additional fuel injectors. I believe they're stock 370cc ca18 injectors.

pipe on my car:

Post by **NeedCAforS13** » Thu Jul 31, 2008 9:14 am

HighwayStar22 wrote:I sent you an email earlier today boss.

replied to your email! and whoever else sent me one... lol

Post by **ragenasian** » Thu Jul 31, 2008 9:52 am

NOOOOOOO it isn't fair. I want to be local. I want the trust intercooler stuff. I wrote first

Man sometimes it sucks being over here in schnitzel land

Post by **NeedCAforS13** » Thu Jul 31, 2008 10:02 am

lol. its a stock intercooler. just fancy piping :P i had an ARC sidemount I ran on my car, but I sold it awhile ago. that was a pimp setup. those ARC coolers used to pop up on eBay all the time...

locals get dibs on large stuff.

if any locals want stock heads or stock block/crank I'll sell the heads for $75 each, and $75 for the crank and block together. definately not shipping anything heavy or inconvenient.

Post by **ca18detgabby** » Thu Jul 31, 2008 10:46 am

did you sell omar's old head?

for 80bucks I think I will pass on the IC piping. why did you run the extra injectors? to rectify the issues TMS was talking about with the "dry" intake runner?

I would however like to hear more about this block.

Post by **ragenasian** » Thu Jul 31, 2008 10:47 am

I want your piping because i have an ARC sidemount

Come on shipping isn't that bad

Post by **NeedCAforS13** » Thu Jul 31, 2008 10:51 am

ca18detgabby wrote:did you sell omar's old head?

for 75 bucks I think I will pass on the IC piping. they arent anything I specially need.

I would however like to hear more about this block.

yeah i think i sold omar's head awhile ago, i remember driving up to Orlando to meet up with him, but I can't remember exactly what we did. his was all rebuilt and ported. these are stock non-rebuilt, but in good running shape. and i still have two on the shelf if i'm not mistaken... maybe only one.

how much will you pay for the piping gabby? shipping is a pain I don't want to deal with boxing it up! haha. the extra injectors are an old school method of running high boost. i never ran them, came from japan that way. it was before they had a good way of running large injectors, they just ran additional injectors in addition to the primary injectors. HKS had an additional injector controller (AIC) I believe.

block is in good shape from what I remember, but I'm going home in like an hour to check it all out. I haven't inspected it lately. Crank also appeared to be in good shape, it was wrapped up and duct taped for the last 3 or 4 years. tons of pics tomorrow, i promise!

Post by **Rin5** » Thu Jul 31, 2008 10:55 am

is that your engine bay? how much for the oil cooler n koyo rad? you happen to have gauges?

Post by **NeedCAforS13** » Thu Jul 31, 2008 10:56 am

Rin5 wrote:is that your engine bay? how much for the oil cooler n koyo rad? you happen to have gauges?

whoa. no. sold the car over a year ago. this is just parts i have laying around. koyo, oil cooler, and everything else in the engine bay went with the car.

Post by **NeedCAforS13** » Thu Jul 31, 2008 10:58 am

ragenasian wrote:I want your piping because i have an ARC sidemount

Come on shipping isn't that bad

make it worth my while really, what are you willing to pay? (I'm not trying to milk you man, be honest. i'm just trying to clean out the garage... whats it worth to you?)

Post by **The_Chosen_One** » Thu Jul 31, 2008 2:28 pm

NeedCAforS13 wrote:
alright, how about we work out a trade. I want to powdercoat my subaru intake manifold and valve covers (2) when I pull apart the motor in afew weeks. I'll send you all 3 CA18 covers and the bare subaru manifold and 2 covers, you powdercoat them a simple dark blue color (nothing fancy, no flake or texture) and you send them back. will that work? I figure shops around here charge about $60-75 to powdercoat afew parts... let me know what you think.

Get me measurements on the intake manifold, I want to make sure it'll fit my oven.

Post by **NeedCAforS13** » Fri Aug 01, 2008 3:49 am

The_Chosen_One wrote:
Get me measurements on the intake manifold, I want to make sure it'll fit my oven.

I'll measure it tonight.

And now for pics... make offers. Lowball. Get this stuff out of my garage. If you're local and want to come pick up parts alot of the stuff could be exchanged for beer. Stella or Becks works.

CA18DET bellhousing

Coolant Temp Probe (From a CA18ET, I ran my autometer probe in it)

Engine Pics. Still have a good set of pistons and rods. Also have 3 good rods with 3 bad pistons on them. Block and set of pistons alone SOLD.

Modified by NeedCAforS13 at 3:15 PM 8/1/2008
Modified by NeedCAforS13 at 3:02 PM 8/4/2008

Post by **NeedCAforS13** » Fri Aug 01, 2008 3:52 am

Intake manifold. Selling parts off it. Keeping the bare manifold for myself. Injectors work to the best of my knowledge. I bought this off of Dee about a year ago but never used it myself.

CA18DE and CA18DET RWD Oil pans. Good shape. CA18DE one is SOLD.

More Parts... Anything in the picture is for sale.

Modified by NeedCAforS13 at 3:02 PM 8/4/2008

Post by **NeedCAforS13** » Fri Aug 01, 2008 3:55 am

SMIC and Trust piping kit. Hot and Cold pipes! Piping is probably sold, but I figured I'd put up pics anyways. Paint is chipping, but the piping is in good shape. The SMIC is dented, but I ran it like that. My car was excessively low... intercoolers didn't stand a chance!

Big Autometer Tach:

Little Autometer Tach:

Valve covers (pending sale on top two and one front):

Post by **Rin5** » Fri Aug 01, 2008 5:38 am

what are the nipps on the IC pipes and how much for either of the tach and how much for the CA balancer?

shipped to 19901

Post by **NeedCAforS13** » Fri Aug 01, 2008 5:51 am

Rin5 wrote:what are the nipps on the IC pipes and how much for either of the tach and how much for the CA balancer?

shipped to 19901

not sure what nipps you're talking about. on the cold pipe its additional injectors, on the hot pipes they're vaccum lines for a boost gauge and wastegate. I had them plugged. PIPING is pending sale. Gotta get a box and figure out shipping costs, but I have a buyer lined up.

the CA balancer is probably sold already, I got an email about it yesterday.

$20 for the small tach, $50 for the big one. Plus shipping ($10 flat rate box)

Post by **NeedCAforS13** » Fri Aug 01, 2008 5:52 am

also anyone from Nico who buys the ARP bolts on eBay I'll ship for free.

Post by **Rin5** » Fri Aug 01, 2008 6:16 am

well incase balancer doesnt sell...i call dibs

Post by **HighwayStar22** » Fri Aug 01, 2008 8:00 am

Hey I will be down to get that block and what we talked about. Just wanted to make sure you knew. I was dead serious. I'll send you an email and we'll get it all worked out. My phone is dead so I can't email out right now. But you'll get one around 3:30 or so. Thanks Sean.

CA18DET parts for sale

CA18DET parts for sale

Re: CA18DET parts for sale (NeedCAforS13)

Re: CA18DET parts for sale (NeedCAforS13)

Re: (NeedCAforS13)

Re: (The_Chosen_One)

Re: (ca18detgabby)

Re: (HighwayStar22)

Re: (NeedCAforS13)

Re: (ragenasian)

Re: (NeedCAforS13)

Re: (NeedCAforS13)

Re: (ca18detgabby)

Re: (NeedCAforS13)

Re: (Rin5)

Re: (ragenasian)

Re: (NeedCAforS13)

Re: (The_Chosen_One)

Re: (NeedCAforS13)

Re: (NeedCAforS13)

Re: (NeedCAforS13)

Re: (Rin5)

Re: (NeedCAforS13)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums