CA18DET Part Out

[Flybert]

LOWERED THE PRICES ONCE AGAIN. WILL TAKE OFFERS AS WELL.

My friend is parting out his CA. He's basically selling everything except the intercooler, pipes, BOV, radiator, and bottom end. If my prices seem high on something you want, send me a reasonable offer via email. Some stuff I might not budge on though so keep that in mind.

Starter $65Crank Angle Sensor $40CA18DET injectors (good for KA24E turbo project) $40Throttle Body with TPS $20Clutch Fan $15FPR $15Valve Covers (one fitting above turbo manifold is JB welded) $20Stock Exhaust Manifold $15timing belt with about 400 miles $20stock intake $15Stock CA T25 dump pipe/o2 extension $10Timing belt upper covers $10Coil Packs $10 per coil packFuel Rail $10Intake Manifold Accessories MAKE OFFER

MAFS SOLDECU SOLDIgnitor Chip SOLDCA T25 turbo SOLDrebuilt head new valves and guides with about 400 miles on it SOLDCA18DET fan shroud SOLDAlternator SOLD Crank Pulley SOLDwater pump with about 400 miles on it SOLDCA transmission - super silky shifts, best nissan transmission I've ever felt, has better CA 5th gear for more lowend power SOLDPower Steering Pump SOLDEngine wiring harness with out grey and brown plug and dash plug SOLD

Email me or respond to the thread.





Modified by Flybert at 5:52 PM 4/10/2007
Modified by Flybert at 3:36 PM 4/20/2007

[ca240sxcoupe]

i need the clutch and pressure plate let me know how [email protected]

[LongGrain]

i might take the PS pump, does it come with brackets? i could also use the alternator brackets.

[Flybert]

I can sell you the p/s pump with the p/s and alternator brackets.

[mr2erdave]

Hi im looking for a set of pistons if your taking the engine apart thanks let me know david

[Flybert]

I might be able to sell you them but you gotta give me a week or so.

[Bwana]

Dang, that is one worthless catch can setup...

[Rookieca18det]

i'll take the p/s pump,belt, and brackets.

[email protected]

[boost_boy]

I'll take the harness! Let me know whom to paypal and it's a done deal.

Dee

[davidricardo86]

Interested in the CA t25 and the clutch fan if both in good working condition. Also i know this isnt listed but ill definately pay you for it, the Knock Sensor. Can you verify resistance value between terminal and base? According to the usdm ca18de FSM it should be 500k-600k ohms.

Thanks!

[boost_boy]

Interested in the CA t25 and the clutch fan if both in good working condition. Also i know this isnt listed but ill definately pay you for it, the Knock Sensor. Can you verify resistance value between terminal and base? According to the usdm ca18de FSM it should be 500k-600k ohms.

Thanks!

You got mail!

Dee

[snowy_s13]

I would love the water pump pulley, i went to electric fans and my pulley is slightly bent and scaring me. [email protected]

[dvd]

interested in the air regulartor the thing htat looks like a diaphram. dvdevo at yahoo

[vipi0]

can you give me a little brake on price if i buy all of this ?shipped to 77058CA T25 turbo $80Power Steering Pump $50Crank Pulley $30Coil Packs $15 per coil packCrank Angle Sensor $100Ignitor Chip $50Throttle Body with TPS $40Stock Exhaust Manifold $30MAFS $30stock CA t25 turbo lines $30Stock CA T25 dump pipe/o2 extension $30

[Flybert]

All emails have been sent.

can you give me a little brake on price if i buy all of this ?shipped to 77058CA T25 turbo $80Power Steering Pump $50Crank Pulley $30Coil Packs $15 per coil packCrank Angle Sensor $100Ignitor Chip $50Throttle Body with TPS $40Stock Exhaust Manifold $30MAFS $30stock CA t25 turbo lines $30Stock CA T25 dump pipe/o2 extension $30

Yeah, shoot me an email and we can work it out. In your email, send me your offer. The crank pulley is no longer available though.

Dang, that is one worthless catch can setup...

What part of this thread did I ask for guys with usernames of Bwana to make pointless comments in my FOR SALE thread? Let me go back and read my original post...yup never asked for you to post in here with your pointless comments. Just trying to help people that need random CA stuff so **** off unless you're going to buy something. Actually, I don't wanna sell anything to you so you can leave my thread and never come back. Thank you, don't come again.

[Masterdebater]

what part of socal u at? maybe i can pick up?and whats more info on head.

[Jiggyfry]

Hey buddy, still have the water pump? Im still interested. I have your PayPal adress so if it's a yes ill shoot you the $$$$$. We already discussed the price.

[patman18]

would you have a flywheel for sale by chance?how much shipped to vancouver, canada

[CApwredS13]

alright i need the p/s pump and bracket tell me whats up and i need your email adress

[Flybert]

what part of socal u at? maybe i can pick up?and whats more info on head.

I'm in whittier but often go out towards Palmdale. Since I prefer not to ship it, you get priority on it. Valves were replaced, head surface was leveled, valve seals were replaced, and the head was hot tanked and cleaned. I'm trying to get the invoice from my friend to see what else the machine shop did. All I know is that it cost him about $500 to get it done. I'll have some pics up tomorrow when I get the intake manifold off.

Hey buddy, still have the water pump? Im still interested. I have your PayPal adress so if it's a yes ill shoot you the $$$$$. We already discussed the price.

Didn't I give you a shipping price. I thought I sent you my paypal info as well. I'll send you another email tonight.

would you have a flywheel for sale by chance?how much shipped to vancouver, canada

Yeah I have one but it won't be available for a couple weeks. I'll get back to you on that if you haven't found one already.

alright i need the p/s pump and bracket tell me whats up and i need your email adress

That is pending sale to someone else. I'll get back to you on it if he doesn't come through. If you click my screen name, my email should be there.

[Flybert]

Here are some pics of the wiring harness. You'll notice that a few of the connectors are cracked. They still work but if you are a perfectionist, you might want to look elsewhere. The harness won't include the dash connector or the brown and grey plug near the battery.

There's also a close up of the clutch fan. It rubbed on the fan shroud at one point but it didn't rub a whole lot off. It still works great. The fan shroud has a little hole where the fan rubbed but it still works great.

The IACV or whatever it is with the blue plug is a little bent and cracked but still works perfect. No cold start problem whatsoever.

I also include a pic of the water pump. You'll notice how clean it is because it's practically new with 400 miles on it. I also included a pic of the ECU, ignitor chip, and water pump pulley for people that were interested in that stuff.

[Jiggyfry]

Payment for the water pump has been sent. Could you please wmail me the tracking number once you ship it out? Thanks!

[Flybert]

Payment for the water pump has been sent. Could you please wmail me the tracking number once you ship it out? Thanks!

Yeah, I'll send the tracking number for sure.

[Masterdebater]

ok now i need a transmission :/let me know details on what u can do for me and if i can pick up or if ur in p-dale...i need one bad lol 1st gear is considered gone.

[Jiggyfry]

Yeah, I'll send the tracking number for sure.

Any word? Did you ship it out? Just curious since I havent heard anything. Thanks.

[float_6969]

Is the intercooler piping/bov for sale?

[Flybert]

I think I sent out all the tracking numbers to your emails so if you didn't get it, let me know and I'll get them to you.

Any word? Did you ship it out? Just curious since I havent heard anything. Thanks.

Shipped it this weekend. It went out UPS as a gift. Your tracking number is 1Z9938046888473929

[cochino uno ochenta]

Is the intercooler piping/bov for sale?

only the piping but not the bov i can weld on what ever flange u wantif u like

[honda_killer240]

i need that turbo, email me if its not sold

[email protected]

[cochino uno ochenta]

emails sent thanks