CA18DET no start/no fuel

ONLY for ADVANCED technical discussion about the 240sx!
Post Reply
User avatar
4g6387
Posts: 29
Joined: Wed Jan 08, 2014 10:15 am
Car: 92 240sx SE
Location: North Carolina

Post

I have recently done a ca swap in my 92 s13. I have ordered a harness from wiring specialties and have everything plugged up to my knowledge except one 5 or 6 pin connector right behind the coolant jug on passenger fender well. Now wiring specialties is calling this plug the injector resistor box, but upon all my research the only resistor box is the 2 wire on the driver side fender which i have installed the one that came with my ca engine. I need to know if there is a secondary resistor box that i am missing or is this plug just not used or what. I have fuel to the rail for sure and i have fire for sure. So this is the only thing i can think of to be giving me this issue. any help is greatly appreciated.

Top
User avatar
4g6387
Posts: 29
Joined: Wed Jan 08, 2014 10:15 am
Car: 92 240sx SE
Location: North Carolina

Post

Problem solved. It was actually the drop resistor. There apparently are two different styles and i of course have the wrong one.
Top
Post Reply

Return to “240SX Technical Forum”

Search for Nissan stuff on ebay!
Find Your Forum!

 

NICOclub's Nissan forums and Infiniti forums and all affiliated sites are the property of HDS Holdings, Inc.
They are independent publications and are not affiliated with or endorsed by Nissan or Infiniti.

Information Copyright © 2000-2026 by NICOclub, all rights reserved. Material may not be copied or reprinted without written permission.

Privacy Policy