Its kind of a dumb question so bear with me. When i got my engine it came with two boxes that look like ecu's. One i know definatly is the ecu the other i have no clue, the plug was cut from the wiring harness and is plugged into itself. I'm not sure what the hell it does and can't find anything about it. Did S13 come with traction control or anything that would take a computer itself? Any help would be greatly appericated!! Thanks
BTW the engine is going into a 72 spitfire if that helps.
CA18det newb question?
-
indiana929
- Posts: 4
- Joined: Mon Dec 10, 2007 5:21 pm
- Car: 1972 Triumph Spitfire
-
sideways danny
- Posts: 348
- Joined: Wed Jul 27, 2005 2:29 pm
- Car: s13, CA18DET
Re: CA18det newb question? (indiana929)
a photo of what you have would help hugely
-
MeanGreenS13
- Posts: 3390
- Joined: Sat Aug 20, 2005 12:59 pm
- Car: 2011 Chevrolet Silverado 2500HD
- Location: Ocala, FL
- Contact:
Re: CA18det newb question? (indiana929)
maybe the control module i keep hearing about for the ECCS system and the butterflies in the intake manifold... i didnt get one and dont have the butterflies at all anymore so i wouldnt know lol
Re: CA18det newb question? (MeanGreenS13)
The butterflies are actuated by a circuit in the ECU. It's probably the ABS computer or automatic seatbelt computer from a USDM car. Pics would help.
-m
-m
-
ca18detgabby
- Posts: 3329
- Joined: Sat Feb 10, 2007 5:31 pm
- Car: 92 Nissan S13 ca18det SOLD
03 Infiniti G35 - Location: lake Mary FL
- Contact:
Re: CA18det newb question? (indiana929)
could be your drop in resistor, but those are about 1/3 the size of an ecu.
-
float_6969
- Moderator
- Posts: 17366
- Joined: Mon Aug 26, 2002 1:55 pm
- Car: CA18DET swapped 1995 Nissan 240sx (too many mods to list)
2015 SV Leaf w/QC & Bose (daily) - Location: Topeka, Kansas
- Contact:
-
indiana929
- Posts: 4
- Joined: Mon Dec 10, 2007 5:21 pm
- Car: 1972 Triumph Spitfire
Re: (float_6969)
thanks found out it is for the ABS. Btw i got it to fire finally!! I have been working on that wiring harness for a while now but she fired up now just little crap. Hopefully be on the road by spring!! and again thank you for the help i would not have gotten it to run if it wasnt for this forum.