ca18det help spark and fuel still no start

[aaronscomp]

Ok so my car is getting spark and fuel now but it still doesn't pop or anything im a noob to these motors still im going to mess with the timing, make sure the belt is all lined right. But correct me if im wrong these motors dont have a resister for the injecters stock because its low inped. thanks

[ca18detgabby]

you need a droppin resistor for the injectors boss because it IS low imped.

[float_6969]

You do need a dropping resistor.

Check the cam timing.

[aaronscomp]

o alright do any of you guys have a pic of a stock one or the plug or anything just to get an ideal. i can use a dsm resister correct and will it pop or try to run with out one in there

[aaronscomp]

So would this be the plug for the drop in resister then