(CA18DET) Help. Coil pack wire up.

[Got Gas]

Whats up peoples?

How would I go about wiring up my coil packs?

From the car fuse box. (89' 240sx)The male end, ignition wires. (From original S13 car harness)This is the plug with the Ignition wires going to it. (CA18DET female harness)Traced from coil pack engine harness.The Blue/Red wire was traced from here.


Modified by Got Gas at 2:52 AM 5/27/2009

[TannerLDR]

I have the brown and blue/red wire spliced together into a 12v source

[Got Gas]

Well, I hooked my blue/red to a 12v source, nothing to brown. Does not work. Yours works right?

[TannerLDR]

on your second picture, the wires that are cut there is a brown wire. I have that spliced in with the blue/red one as well.

I just followed this web site--- http://www.frsport.com/SR20DET....html ----

It worked well for me and fires right up

[Got Gas]

Cool, but is it the same with the CADET?zeropost?cmd=reply&id=4785736#

[Got Gas]

Ok, I must be missing something. I've traced all my wires. My coil packs Now Have Power, but still no spark. My fuel pump has power, but nothing is coming through the injectors. Now I have two wires not connected, don't know where they go. #17 Injector Pulse Duty output (Gray/Red) & #8 Variable Intake Butterfly Control solenoid (Gray, Silver striped)

[Got Gas]

Ok, I must be missing something. I've traced all my wires. My coil packs Now Have Power, but still no spark. My fuel pump has power, but nothing is coming through the injectors. Now I have two wires not connected, don't know where they go. #17 Injector Pulse Duty output (Gray/Red) & #8 Variable Intake Butterfly Control solenoid (Gray, Silver striped)