CA18DET engines: Want one?

Post by **NismoGreg** » Fri Mar 16, 2007 1:47 pm

I'm curious to see what how much it would cost to get the motor only and nothing else in case my ca blows up. My email is [email protected]

Post by **boost_boy** » Fri Mar 16, 2007 1:53 pm

NismoGreg wrote:I'm curious to see what how much it would cost to get the motor only and nothing else in case my ca blows up. My email is [email protected]

The engine is the cheap part, but the shipping may not be. I'll have my boy check for shipping tomorrow.

Dee

Post by **Apex** » Sat Mar 17, 2007 5:12 pm

I am looking for a full uncut harness and an ignitor chip shipped to 35043.

[email protected]

thanks

Post by **ca240sxcoupe** » Sun Mar 18, 2007 3:50 pm

need a stock downpipe and intercooler piping to 30008...please let me know

Post by **Packrat182** » Mon Mar 19, 2007 9:14 am

Might as well throw mine in here, i am in need of a u12 fwd ca18det...dont needa transmission. just ecu wireharness and motor. Central PA area.Thanks,[email protected]
Modified by Packrat182 at 12:24 PM 3/19/2007

Post by **busteds13** » Tue Mar 20, 2007 12:32 pm

Dee, My KA's been dead since like september, i need boost, can i get a quote for a motorset, shipped to 48202, Detroit, if the zip is wrong, and a guestimate on how long it would take, [email protected],

-thanx, misha

Post by **NismoGreg** » Tue Mar 20, 2007 12:57 pm

boost_boy wrote:The engine is the cheap part, but the shipping may not be. I'll have my boy check for shipping tomorrow.

Dee

Okay thanks

Post by **burntricer** » Tue Mar 20, 2007 1:34 pm

complete motorset for rwd s13 swap shipped to 55605

[email protected]

plz&thx

Post by **boost_boy** » Tue Mar 20, 2007 3:00 pm

busteds13 wrote:Dee, My KA's been dead since like september, i need boost, can i get a quote for a motorset, shipped to 48202, Detroit, if the zip is wrong, and a guestimate on how long it would take, [email protected], -thanx, misha

You got mail!

Dee

Post by **boost_boy** » Tue Mar 20, 2007 3:05 pm

Packrat182 wrote:Might as well throw mine in here, i am in need of a u12 fwd ca18det...dont needa transmission. just ecu wireharness and motor. Central PA area.Thanks,[email protected]

Modified by Packrat182 at 12:24 PM 3/19/2007

You got mail!

Dee

Post by **busteds13** » Tue Mar 20, 2007 4:11 pm

mailed you back , thanx

Post by **Zero260** » Tue Mar 20, 2007 5:07 pm

Zero260 wrote:still looking for a motorset shipped to 53590, but I'll remember to give my Email this time [email protected]

still looking for an email

Post by **boost_boy** » Wed Mar 21, 2007 4:28 am

Zero260 wrote:still looking for a motorset shipped to 53590, but I'll remember to give my Email this time [email protected]

You got mail!

Dee

Post by **nomadlife** » Wed Mar 21, 2007 8:41 am

nomadlife wrote:
boost_boy wrote:I didn't get the message via email. And as for the cost of an auto, it really doesn't matter. The cost of everything else is driving-up the cost of these engines.

Boost_BoyLooking for CaDET/Auto full setup RWD, cost shipped to 65536? AC,PS wiring and full tubing. Email is nomadlife_2000@yahoo. Thanks
Dee, does he have any autos yet? Is he out getting a shipment, if he could get one I would prepay. Could I also get price of CA18DET with all except transmission. Thanks.

Post by **rednissan180** » Wed Mar 21, 2007 12:48 pm

i need to get a ca for my 240...

Post by **boost_boy** » Wed Mar 21, 2007 1:19 pm

There are 2 complete engine sets left and a few longblocks. There are also many inquiries as well, but money talks (and we all know that). Oh yeah, do you need an engine or engine set?

Dee

Post by **frobro85** » Thu Mar 22, 2007 5:20 pm

how much for full motor,trans and uncut wiring for 240 to 85711 AZ(To much to make the ka top notch, need a solution)

[email protected]
Modified by frobro85 at 9:06 PM 3/22/2007

Post by **rednissan180** » Fri Mar 23, 2007 8:10 am

how much to get my shell running? (38016)[email protected],jesse

Post by **boost_boy** » Fri Mar 23, 2007 10:27 am

rednissan180 wrote:how much to get my shell running? (38016)[email protected],jesse

You got mail!

Dee

Post by **boost_boy** » Fri Mar 23, 2007 10:30 am

frobro85 wrote:how much for full motor,trans and uncut wiring for 240 to 85711 AZ(To much to make the ka top notch, need a solution)

[email protected]

Modified by frobro85 at 9:06 PM 3/22/2007

You got mail!

Dee

Website · Post by **JNM240** » Sat Mar 24, 2007 2:55 pm

Hey Dee, could i get a price quote + shipping on a RWD CA18DET motor set with 5sp transmission shipped to 70461 (commercial).

Thanks!Jason

Post by **boricua_bond** » Sat Mar 24, 2007 4:11 pm

hey Dee, i need a motor set just the motor........i blew a rod.......i stay in tampa......email me at [email protected]

Post by **boost_boy** » Sun Mar 25, 2007 4:16 am

JNM240 wrote:Hey Dee, could i get a price quote + shipping on a RWD CA18DET motor set with 5sp transmission shipped to 70461 (commercial).

Thanks!Jason

You got mail!

Dee

Post by **boost_boy** » Sun Mar 25, 2007 4:16 am

boricua_bond wrote:hey Dee, i need a motor set just the motor........i blew a rod.......i stay in tampa......email me at [email protected]

You got mail!

Dee

Post by **y11ngdanjr** » Sun Mar 25, 2007 12:14 pm

how much for complete motorset to LA in Cali?

emaiil me at [email protected]

Post by **MustangManV6** » Sun Mar 25, 2007 12:58 pm

Hey Dee,

I am trying to get an idea on what I will be spending on a CA for my swap this summer. I need everything for a 240sx swap.

My email: [email protected]

and it would go to columbia, sc 29063

Thanks for your time!

Post by **boost_boy** » Sun Mar 25, 2007 3:29 pm

MustangManV6 wrote:Hey Dee,

I am trying to get an idea on what I will be spending on a CA for my swap this summer. I need everything for a 240sx swap.

My email: [email protected]

and it would go to columbia, sc 29063

Thanks for your time!

You got mail!

Dee

Post by **boost_boy** » Sun Mar 25, 2007 3:34 pm

y11ngdanjr wrote:how much for complete motorset to LA in Cali?

emaiil me at [email protected]

You got mail!

Dee

Post by **progman** » Sun Apr 01, 2007 5:13 am

I would like a price quote for a ca18det short block only. I just want block + pistons rods and crack etc. Please send me a price quote. Shipping to 15205.

My bearings went bad on my crank and the pistons hit the head (not valves). pistons were chewed up on the front and back sides.

[email protected]

Thanks!

Post by **Reno** » Sun Apr 01, 2007 5:24 am

Can I get a quote on a complete swap shipped to 32730. Thank you

---[email protected]---

CA18DET engines: Want one?

Re: CA18DET engines: Want one? (boost_boy)

Re: CA18DET engines: Want one? (NismoGreg)

Re: CA18DET engines: Want one? (boost_boy)

Re: CA18DET engines: Want one? (boost_boy)

Re: CA18DET engines: Want one? (ca240sxcoupe)

Re: CA18DET engines: Want one? (boost_boy)

Re: CA18DET engines: Want one? (boost_boy)

Re: CA18DET engines: Want one? (NismoGreg)

Re: CA18DET engines: Want one? (busteds13)

Re: CA18DET engines: Want one? (Packrat182)

Re: CA18DET engines: Want one? (boost_boy)

Re: CA18DET engines: Want one? (Zero260)

Re: CA18DET engines: Want one? (Zero260)

Re: (nomadlife)

Re: CA18DET engines: Want one? (boost_boy)

Re: CA18DET engines: Want one? (rednissan180)

Re: CA18DET engines: Want one? (boost_boy)

Re: CA18DET engines: Want one? (boost_boy)

Re: CA18DET engines: Want one? (rednissan180)

Re: CA18DET engines: Want one? (frobro85)

Re: CA18DET engines: Want one? (boost_boy)

Re: CA18DET engines: Want one? (JNM240)

Re: CA18DET engines: Want one? (JNM240)

Re: CA18DET engines: Want one? (boricua_bond)

Re: (boost_boy)

Re: (MustangManV6)

Re: (y11ngdanjr)

Re: (boost_boy)

Re: (progman)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums