CA18DET engines: Want one?

Post by **boost_boy** » Mon Aug 14, 2006 2:34 pm

Neejay wrote:Hey Dee, how many more motorsets do you have?

Two complete ones that are clean. Procrastinators keep on procrastinating. If you're really interested, don't snooze.

Dee

Post by **DomRep240sx** » Mon Aug 14, 2006 8:23 pm

Boost Boy, I'm interested in the ca18det but not to knowledgeable about the motor itself.. was looking into rb swap but I just like reading the CA forums and it got my attention.. if you could e-mail me a quote for the motor+ 5spd transmission and i wanted to ask you some questions bout the motor too but I'll just wait for the e-mail

E-mail - [email protected]

Post by **831_salinas240sx** » Tue Aug 15, 2006 7:44 am

Hey Boost. I live in the 93905 area code in cali. i would like to know how much for the engine, transmission,a/c, p/s, and shipping of a ca18det Basicaly the whole swap. please let me know

my email is: [email protected]

Post by **BACARDI_DWB** » Wed Aug 16, 2006 3:08 am

hey boost boy you never got to my post on page 8.... thanks

ryan

Post by **boost_boy** » Wed Aug 16, 2006 9:43 am

BACARDI_DWB wrote:Hey i have some questions about the ca18det's that you sell? plus i need a price quote. I want to throw one in my Datsun 510. want the 4 port version head and need the 5 speed transmission also (complete swap). have some questions so please email me at both

[email protected][email protected]

really appreciate it!!!!! thanks~Ryan

You got mail!

Dee

Post by **ShiftSunny** » Thu Aug 17, 2006 5:59 pm

Im in miami and im trying to buy a 240 and if i do get a hold of one soon i wanna swap in a CA so how much is the engine (wont have to be shipped i can pick it up) and does it come with a/c etc. [email protected]

Modified by ShiftSunny at 1:56 PM 8/18/2006
Modified by ShiftSunny at 1:30 PM 8/19/2006

Post by **unpredictable180** » Fri Aug 18, 2006 8:21 am

hey im interested in getting a ca.i would like to know if you have any motorsets left.and also how much it would cost for the whole motor set plus shipping to 85233.i need one asap since i just blew my ka.thanx.victor

Post by **i need tires** » Mon Aug 21, 2006 6:15 am

i would like to know how much a motorset will run me and how much it would cost for shipping to 85032?

*hey Victor since we are both in AZ we might be able to ship them to one place on the same freight to perhaps making shipping cheaper...

Post by **boost_boy** » Mon Aug 21, 2006 6:48 am

unpredictable180 wrote:hey im interested in getting a ca.i would like to know if you have any motorsets left.and also how much it would cost for the whole motor set plus shipping to 85233.i need one asap since i just blew my ka.thanx.victor

You got mail!

Dee

Post by **boost_boy** » Mon Aug 21, 2006 6:48 am

i need tires wrote:i would like to know how much a motorset will run me and how much it would cost for shipping to 85032?

*hey Victor since we are both in AZ we might be able to ship them to one place on the same freight to perhaps making shipping cheaper...

You got mail!

Dee

Post by **spriggan486** » Mon Aug 21, 2006 11:11 am

I would like to buy a ca18det full swap set. how much would it be shipped to 30102?

thanks

Post by **Scotty Dont** » Tue Aug 22, 2006 6:54 am

Hey dude, looking into getting a CA for my car. Car previously had a spun rod bearing so I replaced it with another SOHC, but something tells me this one isn't going to last to long either. So if ya could, get back to me with some info. That would be awesome and greatly appreciated. I'm located in 01013 BTW. Thanks man!

Post by **kayosphere** » Tue Aug 22, 2006 12:36 pm

Hey Dee u da man...

I was hoping you could help me find a full rwd ca18det thanks in advance bro

-Fred

Post by **boost_boy** » Tue Aug 22, 2006 2:31 pm

kayosphere wrote:Hey Dee u da man...

I was hoping you could help me find a full rwd ca18det thanks in advance bro

-Fred

You got mail, dude!

Dee

Post by **boost_boy** » Tue Aug 22, 2006 2:38 pm

Scotty Dont wrote:Hey dude, looking into getting a CA for my car. Car previously had a spun rod bearing so I replaced it with another SOHC, but something tells me this one isn't going to last to long either. So if ya could, get back to me with some info. That would be awesome and greatly appreciated. I'm located in 01013 BTW. Thanks man!

You got mail, bro!

Dee

Post by **boost_boy** » Tue Aug 22, 2006 2:39 pm

spriggan486 wrote:I would like to buy a ca18det full swap set. how much would it be shipped to 30102?

thanks

You got mail as well! Dee

Post by **BACARDI_DWB** » Wed Aug 23, 2006 11:43 am

Dee you got mail i am ready now!!!!

Post by **Neejay** » Wed Aug 23, 2006 12:18 pm

Two questions:

1. Do you carry auto CA motorsets?

2. Would you be willing to install stuff prior to sending a motor out (for a fee of course)?
Modified by Neejay at 12:18 AM 8/24/2006

Post by **kahlistrophic** » Thu Aug 24, 2006 5:16 pm

Sorry about the procrastination Dee, I got the ECU, a #98, but the wiring harness i got with the motor doesnt fit at the ecu clip, im figuring its wrong, so i actrually need A harness to fit into an s13. Please lemme know ASAP, sorry for the delay last time.

Post by **Reno** » Sun Aug 27, 2006 10:40 am

boost_boy how much to 32730? what else do i need after the stuff? fuel pump?

Post by **boost_boy** » Sun Aug 27, 2006 4:13 pm

Neejay wrote:Two questions:

1. Do you carry auto CA motorsets?

2. Would you be willing to install stuff prior to sending a motor out (for a fee of course)?

Modified by Neejay at 12:18 AM 8/24/2006

The answer to question 1 is "no", but there might be an auto transmission around my friend's warehouse somewhere.

The answer to question 2 is "Yes". Anything you would like me to do can be done, for a fee of course .

Dee

Post by **shpaintball** » Sun Aug 27, 2006 5:02 pm

hey i am very interested in a CA i would love to have one for my 240sx...could you get me [email protected] thanks for any help

Post by **gtrperformance** » Sun Aug 27, 2006 5:54 pm

Why would any of you guys take out the 2.4L engine and swap to a 1.8L? That's crazy. Also, $1400 for the CA is WAY TOO MUCH. You can get an RB20 for about that. I just paid $1600 plus $325 shipping for the RB20DET, transmission, ECU, UNCUT harness, AC lines, drive shaft, speed cable and the entire rear subframe from a R32. It even had the calipers and ebrake cable on it. http://www.superiortradinginternational.com. Get their number from the site and call. Ask for a guy named Jimmy. He hooked me up. The prices on their site are not the same as the actual ones, as long as you know how to talk turkey. I'm about to drop a CA18DET into my 85 AE86 GTS coupe. It's gonna be nice as long as I build the internals.

Post by **float_6969** » Mon Aug 28, 2006 2:18 am

Because the RB20 is a big fat heavy pig. The swap also is much harder to perform than the CA swap. If you've got anything else negative to say, please keep it to yourself, or post it in a different thread.

Post by **BACARDI_DWB** » Mon Aug 28, 2006 2:33 am

AND not all peeps in here can fit a RB20 like ME for example. and I didn't buy from Dee cause it was the best price. i bought from Dee cause i know that when i get the motor i will get an awesome motor that wasn't peiced together from 8 different cars and also if i ever need help he would only be a phone call away and would help with pleasure. Its not about the product (at least for me) its the unity and the customer service included.... he is just trying to spread the CA18 love out there.... so i am with float.....

Post by **Neejay** » Mon Aug 28, 2006 1:28 pm

boost_boy wrote: The answer to question 1 is "no", but there might be an auto transmission around my friend's warehouse somewhere.

The answer to question 2 is "Yes". Anything you would like me to do can be done, for a fee of course .

Dee

Can you send me an email if you dont want to post yours here?

[email protected]

Post by **boost_boy** » Mon Aug 28, 2006 2:29 pm

Neejay wrote:Can you send me an email if you dont want to post yours here?

[email protected]

You got mail!

Dee

Post by **gtrperformance** » Mon Aug 28, 2006 4:35 pm

float_6969 wrote:Because the RB20 is a big fat heavy pig. The swap also is much harder to perform than the CA swap. If you've got anything else negative to say, please keep it to yourself, or post it in a different thread.

I'm not completely knocking the CA or the difficulty in swapping. I just fail to see the logic in dropping down that much in displacement. How in the hell was anything I said that negative to deserve that kind of response anyway? If I was disrespecting the CA I wouldn't have said I was putting one in my AE86. The CA in my opinion is superior to the "boat anchor" SR. I understand sharing the CA love. I'm just trying to help people in the 240 community to save money on engine sets. The place I bought mine did a damn good job on removal and shipping. NO SENSORS BROKE, NO CUTS IN THE HARNESS, and MOST IMPORTANTLY NOTHING WAS MISSING. I'm just tryin to share my connection with my community, homie. If you all felt disrespected then I apoligize. I'll post my money saving tid-bits in another thread.

Post by **'90Silvia** » Tue Aug 29, 2006 11:29 am

Can I get a quote shipped to a business for a motorset. 28117. Everything minus the SMIC to get running to right?

[email protected] *a

Post by **boost_boy** » Tue Aug 29, 2006 12:57 pm

’90Silvia wrote:Can I get a quote shipped to a business for a motorset. 28117. Everything minus the SMIC to get running to right?

[email protected] *a

You got mail!

Dee

CA18DET engines: Want one?

Re: (Neejay)

Re: (boost_boy)

Re: (boost_boy)

Re: (boost_boy)

Re: (BACARDI_DWB)

Re: (boost_boy)

Re: (unpredictable180)

Re: (i need tires)

Re: (spriggan486)

looking for a DET

Re: looking for a DET (kayosphere)

Re: (Scotty Dont)

Re: (spriggan486)

Re: (boost_boy)

Re: (Neejay)

Re: (boost_boy)

Re: (shpaintball)

Re: (boost_boy)

Re: (Neejay)

Re: (float_6969)

Re: ('90Silvia)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums