CA18DET Block for Sale, In perfect condition. Plus some other goodies 4sale.

[OmarM]

Hey CA Guys,

Ive dropped the PRICE to $400!!! Needs a new home. Leaving to Vegas in a Month.

If any of you are planning to rebuild a CA motor for extra power, I have a great starting point for you.

I had my motor sent to P.C.C. Auto in Kissimmee, Fl. for a lot of machine work but I decided to stop my project and get rid of everything because I am moving to Vegas.

Heres the list of whats included and what was done to the block:

Crankshaft was checked for straightness, alignment, then polished.Cylinder Block was degreased and inspected - Rebore and Hone to 83.5mm - New Freeze plugs installed - Resurfaced top of block - Torque and checked main bearings for clearances - Align/Bore the mainsFlywheel has been resurfaced

Brand New Oil pump and Water Pump from Infiniti of Scottsdale installed.

There was a lot of money invested in this motor, I have already sold the head to another member and I need to get rid of the block.

I am looking to get $500 for the block plus shipping. I have receipts for machine work.

Also have the following:B&M Style Short Shifter. 50 bucksCA18DET CAS. 50 bucksNissan Main Stud Kit (ARP202-5402) same as Head bolts for CA. 80 bucksForge Adjustable Wastegate Actuator for T28 turbo. 100 bucks

Omar321-277-9467

Let me know if your interested.
Modified by OmarM at 10:46 AM 7/2/2007

[AWDB12wagon]

It might help if you include how much was taken off the block so an appropriate head gasket can be used.

[OmarM]

It was just a resurface job, nothing extreme. Stock headgasket is perfectly fine. I was going to use stock headgasket on recommendation from NeedCAforS13 who can vouch for quality of work. He bought the Reconditioned Stock rods with 83.5mm CP Forged pistons that were for the motor.

[OmarM]

Adding pics: Not the best but gets you an idea.

[OmarM]

so i couldnt keep camera still, lol

[AWDB12wagon]

So what pistons are these bored to fit? I may be interested in the head studs.~Ryan

[mbmbmb23]

It was just a resurface job, nothing extreme. Stock headgasket is perfectly fine. I was going to use stock headgasket on recommendation from NeedCAforS13 who can vouch for quality of work. He bought the Reconditioned Stock rods with 83.5mm CP Forged pistons that were for the motor.

So this motor has CP forged pistons then?

-m

[OmarM]

So what pistons are these bored to fit? I may be interested in the head studs.~Ryan

the block is bored to fit 83.5mm pistons

[OmarM]

So this motor has CP forged pistons then?

-m

in the same part you quoted me, it states i sold pistons to NeedCAforS13. You would atleast need stock rods and buy a set of 83.5mm pistons.

[Masterdebater]

ill give u 220 for the shifter,studs,adjustable wastegate when are u moving to vegas?

[mbmbmb23]

in the same part you quoted me, it states i sold pistons to NeedCAforS13. You would atleast need stock rods and buy a set of 83.5mm pistons.

My bad, I read it as you originally got the engine from NeedCAforS13 who had bought those pistons for the engine when he had it....and he was vouching for it because he'd owned it.

[OmarM]

I can do 230 shipped. Give me a call at 321-277-9467. I can ship it UPS ground from my job. Call me, its the best way to contact me. I will be at work today from 8am-5pm eastern time. Paypal accepted but if so add 3.5% to the overall price for paypal fees so an even 240 would cover paypal fees.

[Masterdebater]

the manual boost controller will do the same thing as the wastegate wont it? can u do the shifter,studs and man. boost controller for 150?ill call u when u get off work too.

[Masterdebater]

i hate my phone.... >

[AWDB12wagon]

Still waiting on a reply to my e-mail.....................

[OmarM]

I havent received an email. What did it pertain to. I did reply to your question above.

Omar

my current email [email protected]

[Nunook]

Are you still in orlando?I have a friend there, he could look at it for me and pic it up. I can paypall u the money if he says everything is ok.

[AWDB12wagon]

I havent received an email. What did it pertain to. I did reply to your question above.

Omar

my current email [email protected]

I sent you an e-mail, got this responce:

I apologize for this automatic reply to your email.

To control spam, I now allow incoming messages only from senders I have approved beforehand.

If you would like to be added to my list of approved senders, please fill out the short request form (see link below). Once I approve you, I will receive your original message in my inbox. You do not need to resend your message. I apologize for this one-time inconvenience.

Click the link below to fill out the request:

https://webmail.pas.earthlink....l34h3

I clicked on the link and filled the crap out....

[OmarM]

Hey thats cool, just let me know. I sent you an email. Just give me a call and we can figure it out.

Omar 321-277-9467

[OmarM]

TTT!

[Masterdebater]

still want the shifter, phone still sucks...lolif u want to wait to ship it after u move cuz im right here in cali, about 5 hours away from vegas.

[ca18detgabby]

bought coils from Omar good guy. gl with the sale wish I knew you were selling it before I put my CA in...

[Masterdebater]

hmm so the block has been bored out and does it have all the rotating assembly in it? pistons that fit the bore?

[NeedCAforS13]

If it helps, I'll sell the pistons that were made for this block for $450. CP forged ones, ready to drop in.

[OmarM]

Block has only the crank, as stated above this post NeedCAforS13 has the CP Pistons that were for this block. Sean are you including rods withe the pistons? If he is than it is a drop in process and you're on your way to a 500whp reliable block. Let me know I need to get rid of this stuff. I need moving money, I am moving to Las Vegas July 27th, this stuff needs to be gone.

All parts on the block are brand new or have been sent to machine shop. Theres about 300 in machine work, plus all the other parts that amount to about 200+. It is a good deal. No down time. Assemble and drop-in.

[Masterdebater]

i dont have the money to pay for the shipping from florida tho, if u have any of this when ur in vegas it will be much much cheaper

[NeedCAforS13]

rods are still attached. box hasn't moved since I bought it from you. lol. I'm trying to clean out the garage, and I'm probably never going to get around to building my motor up with forged pistons anyways :P

[Masterdebater]

sowhat altogether 850 huh....

[NeedCAforS13]

If you're really interested I'll knock $50 off the pistons to anyone who buys everything (the package).

[progman]

Hey Omar,

I gave you a call today. I'm interested in the block. I will update you later when I'm ready to move forward. I do want to buy the block and the pistons/conrods.

Shipping will be to 15010. Could you please see what you need to get this shipping. Dee has used some carrier before that wasn't too pricey. I'll get you the contact information when I get home to see if thats a good route to take.

Dee: If you see this before I'm able to get this information to him could you please provide that? Thank you

Omar, I'll be in touch.

Ben Engle724 777 [email protected]