CA18de Throttle Body

[Luke_Bucko]

Hi guys, just wondering if there are any upgrades for the CA18de N/A throttle body ? I herd u can swap for a KA24de N/A but im not sure i could be wrong... please help me out, thanks again

[JNM240]

*EDIT* This is for RWD CA18DET, may work for the FWD also, not sure...

Flip a SOHC upside down and it bolts right up. You just have to re-route the coolant lines to bypass the throttle body.

The DOHC doesnt work since the angle of the throttle pulley is very different.

[NUT-CSE]

You can try the RB20det throttle body, its 60mm and is a direct bolt on but you will need to port the plennum side as its smaller (54mm)

[sjbsuperman1425]

again, not sure if this applies to the FWD CA18's, but the KA24DE throttle body DOES work, you just had to make some modifications! XD

http://www.driftopia.com/2007/...y-way/