CA18 stuffs for sale

[NeedCAforS13]

I need to make some money to pay for new struts (stock ones just blew out on the way to Tampa!) and to finish this damn motor... so everything extra I have will be going up for sale here for awhile, then on to eBay! I have assorted CA18DET, CA18DE, SR20DET and JDM silvia stuff I need to clear out:oface

all prices do not include shipping, and are flexible, so make some offers people!

CA18 Stuffs:

Block: VERY CLEAN DET block... will sell complete block, crank, rods, girdle, oil squirters, etc but no pistons for $300... no head either. Will take pictures if you want me to:D

s13 CA18DET ecu. tested on friend's car, and works fine: $75

CA18DE RWD intake manifold. Exactly the same as my DET one, except this has the smaller injectors from the DE. Includes complete intake manifold and fuel rail!: $150 ^off this motor!

CA18DE RWD valve covers... It looks different from the DET one (flat on intake side)... check out the pictures to see how. Might be nice to have an extra set to powdercoat or something? $20

CA18DET Crank Angle Sensor(CAS) :$50

CA18DET Throttle Position Sensor (TPS) :$25

SR20DET stuffs:

Stock SR20DET intercooler with all piping and recirc valve. Works perfect. I used it as did Kevin on his CA18DET: $150

Stock s13 SR20DET turbo exhaust manifold. Came with SR turbo, and I have no use for it! $50

Fan shroud for a SR20DET: $50

JDM S13 stuffs:

S13 Silvia rain guards! EXTREMELY HARD TO FIND! I paid over $120 for them afew months ago and I have not even installed them yet (I need money that bad!) I'm sure I can sell them on eBay for over $100, but I'll say $100 shipped here:) Fit both coupe and hatch s13 240's...**not my pictures of the rain guards, but I can go take some if you want me to!**

I will be more than happy to take pictures of anything else you might need! I have countless other sensors, and small stuff off my 2 motors in the garage I'd be willing to sell... I'm just in a desperate bind for money or else I wouldn't be selling any of this! Help a fellow CA guy out guys! I know one of you guys wants an extra block to build up while you drive the current one!:pface

[email protected] or just respond here...

Sean

[float_6969]

Do I still get the coolant elbow? Hehehe. I'm such a pain in the ***...

[DeathBy240]

I may be interested in the IC and piping, I wont know for a couple days, so dont hold it for me.

[slw240sx]

do the SR manifolds fit the CA's?

[CA19DET]

Quote »do the SR manifolds fit the CA's?[/quote]LOL.....

if we were that lucky there wouldnt be all these posts about finding CA turbo manifolds,,,,,

[NeedCAforS13]

do the SR manifolds fit the CA's?

not even close jon! the bolt patterns are reversed and different sizes:pface nice try though...lol

Sean

[minutericesentra]

$20 sounds good for some valve covers, the plastic center piece is included right? What method of payment do you like? I've got paypal.

[NeedCAforS13]

$20 sounds good to me. let me make sure I have a box and I'll put my paypal address up once I verify I have one:)

Sean

[NeedCAforS13]

ok found a box (my muffler box fits just right, lol), and it looks like about $4 to ship too:) paypal is: [email protected]

thanks,Sean

[minutericesentra]

awesome, I'll send $24 to you then. Here's my address.

Jon Cortner1760 s. 181 e. ave.Tulsa, Ok 74108

[NeedCAforS13]

sounds good man:) I'll send it tomorrow on my way to work for ya!

and floater, i'll send out that coolant elbow for you as well, if you wanna throw afew bucks my way;) i'm desperate!

Sean

[float_6969]

I'm poor, so it depends how much you want for it. Find out how much shipping is and we can go from there? Thanks Sean.

[NeedCAforS13]

already shipped it man... just send me afew bucks when the money situation is better:) no rush.

glad I could help!

Sean

[Onizuka]

I'm poor, so it depends how much you want for it. Find out how much shipping is and we can go from there? Thanks Sean.

sean is poorerer

That SR manifold looks mighty familiar

[NeedCAforS13]

sean is poorerer

That SR manifold looks mighty familiar

aint that the truth:(

and yes, it sure does look mighty familiar!;) lol

Sean

[float_6969]

Damn expensive college. Don't ya love it?

[Onizuka]

Text books and biznotches, always broke and always buisy

ramen noodles 4 life yo, peace out :pimp

(we gangsta at PSU )

[NeedCAforS13]

I'm sick as a mofo, so I probably won't be on the boards for afew days, and then I have finals next week... so I'll be pretty busy crammin' for these damn tests:(

So if you need anything before next thursday, please email me rather than respond here:) [email protected]

Thanks guys,Sean

[float_6969]

I need ur body you sexy, sexy man. Oh, you said not on the boards, my bad. LOL, I'm JK man. I like girls. I REALLY like girls.

[GoofyATX240]

You still have the TPS sensor?

[float_6969]

Got the elbow today Sean, thanks! I just got back from putting it on. Now I don't have a jankity flex radiator hose ductaped to my intercooler piping to keep it in place. It looks so nice now. If you do happen to have a fan clutch lying around, I might be intrested. Seems I accidentally threw mine away. Ooops!

[gore]

any harnesses hanging around?

[NeedCAforS13]

I'm sick as a mofo, so I probably won't be on the boards for afew days

turns out it is strep throat... I haven't eaten much of anything in the past few days:( feel like complete crap... but oh well, its finals week! figures:rolleyes

if you need anything before next thursday, please email me rather than respond here [email protected]

still holds true... I'm not going to be online much because I have ALOT of making up to do as far as studying... the antibiotics are finally kicking in, and I was able to down some milkshakes tonight, but I will be EXTREMELY busy, so I'm going to only answer emails till next Thursday:)

I'll go ahead and answer the questions that have been asked, but if there are anymore, go ahead and email them to me...

Korey- I do have the TPS sensor... and will send it to you (but you know the KA24DE one is the same right?) If you still want the CA one, let me know, and I'll just send it (we'll call it even on the TB trade;))

gore- sorry, no harnesses (unless you want my 2 half engine harnesses for some strange reason;)) both my motors came with cut harnesses so I had to purchase one from themadscientist in Japan... lol

Thanks alot for the responses guys... now buy more stuff!!!:D

Sean

[GoofyATX240]

Dude ill tkae it then and thanks. Do you have my addy by any chance?

[float_6969]

Sean, I'm offically negative broke. I just wrote a rent check that I'm about 90% sure will bounce...

[BookS13]

i'm intersted in the block what happen to it?

[NeedCAforS13]

I still have it if you'd like it send me an email and I'll take some pictures. Would you like all the parts I have left off the block, or just the block itself (There is not enough here to make a running engine BTW. you will need some sensors and brackets. you can take them all off your old motor. I have the block, crank, rods, bad pistons, oil squirters, and other misc. mechanical parts of the bottom end of this motor)

asking $250 plus shipping now:)

Sean

[NeedCAforS13]

oh wait, were you asking what blew up on it? It looks like I might have sucked up a bolt or something metal. check out my website link (on the bottom of this post) to check out my cardomain page. There are alot of pictures on there of the metal chunks that I pulled out of the motor. I basically gave up on this block/head and got a new long block. I was keeping this block with the intent to build up a beefy bottom end, but I need money, so its for sale:(

Sean

[Nismo1182]

Sean, can you part out the bad head?

I need the valves.

[NeedCAforS13]

I don't currently have it, a friend of mine at a machine shop has both heads, and is trying to reweld and fix up the bad one... I'll let you know how that goes (but new valves are relatively cheap too:))

Sean