CA16DE Wiring on a CA18DET motor

[DjLiquid]

This is aimed at you pulsar owners. After looking at my wiring diagram, I cant seem to locate the following wires that go into the ECU (finding a pinout is impossible)

I need the:RPM Signal (to hook up my SAFC2)Throttle Signal (to hook up my SAFC2)Speed Sensor (to hook up my Turbo Timer)

Ive looked high and low so if there is anyone out there that has a FSM for this car, could you please help me out?

Thanks!!

[nismoplsr]

RPM Signal (to hook up my SAFC2)Throttle Signal (to hook up my SAFC2)Speed Sensor (to hook up my Turbo Timer)

This is from the australian version of the FSM for the CA18DE.

Speed sensor- W/L wire going to pin 33(this may not be in North American cars, it is used for the speed limiter which we didnt have)

TPS- white going to pin 19

RPM signal- R/W from ecu to gauge cluster from pin 3

I hope this helps and is accurate.

[DjLiquid]

I didnt think that the schematics would be close at all since the pins are completely different. You sure that'll work?

Ive got a JWT modded CA16DE ECU