CA with S14 KA MAF + AFC2

[Nismo1182]

Well, I just got a AFC2 for my little CA. And I had a S14 KA MAF from a friends car who did a swap. So I figured Id slap on the S14 MAF as a little upgrade over the S13 KA one I was using.

Well, the car runs perfect except for it idles too low (600) Some times it idles at the factory rpms but drops to 600 after a few seconds.

Someone told the me the S14 KA MAF IN and OUT #'s are 5 - 5I know the CA is 7 - 7.

And according to the book, a Z32 MAF is 2 - 2 and if you put it on a S14 SR it would be 2 - 7

So I tried 5 - 7 and still the same thing, so I put it back to 7 - 7.

Like I said, car drives normal just the idle annoys me.

Any thoughts?

I also had to up the fuel to 15% in the LO throttle setting (on hte 1000 rpm graph) Or else the idle would be worse.