CA for sale, Buying an FJ powered S12

[Dattebayo]

I tried to get this motor together in time to enjoy it, but having only one car made it impossible and I was offered the deal of my life. So I need to sell everything!

The motor is apart in its major sections and I'd like to get rid of it in one swoop if I can, but I may entertain parting it if need be (last resort).

I have:50K equivalent miles on motorJDM Head (8 port)Block, good compression, may need to have mating surface done2 intake manifolds, one pinted black and some other stuff done to it2 Turbo manifolds, stockTransmission, good conditionPiston ring setRod & Main Bearing setFull head gasket set with oil seals, intake manifold, and exhaust gasketsSR20 TurboFlywheel, stockEngine harness with stock MAFS, dropping resistor and other stuff4 Coil packs (duh)Injectors and fuel rail, stockPower steering pumpAlternatorBrand New oil pumpOriginal water pump, not sure what its condition isEverything that usually goes with it but is too small to mention...

So Like I said, I would like to get rid of everything all at once, parting is last resort (I guess Ill say when last resort has happened? )

Throw me an offer, I have put over a grand into finding everything piecemeal since I bought a long block and went from there.

Thanks for all the great information, you guys. I wouldnt have gotten it all together if it werent for NeedCAforS13, boost_boy, or TMS. Anyone else I missed, thanks go to you too. But an FJ is too good to pass up! See you on the flip side...

[Hillkill]

FJ20 s12 = PIMP

[ILOVESILVIA(S13)]

How much would you let the turbo go for, and what kind is it? T28 or T25

[Dattebayo]

T25. Im not parting out quite yet.

[RalliartRsX]

Definately interested!! I am local. Email me your number and I will call right away!!

Interested in:Brand New oil pump50K equivalent miles on motorJDM Head (8 port)Block, good compression, may need to have mating surface doneRod & Main Bearing setFull head gasket set with oil seals, intake manifold, and exhaust gaskets

Give me a price on those please (separate and together). My email is [email protected] for quickest response.

Thanks, Chris

P.S Also, give me a price on everything.

[Dattebayo]

Reply sent! thanks for the quickness.

[Dattebayo]

Pending sale on all that stuff...

I will know by friday about 7ish EST y'all.

If I can get buyers for everything else except for:

Brand New oil pump50K equivalent miles on motorJDM Head (8 port)Block, good compression, may need to have mating surface doneRod & Main Bearing setFull head gasket set with oil seals, intake manifold, and exhaust gaskets

...then it will be a done deal.

[davidricardo86]

Im also interested in the turbocharger. What is its condition? Any idea of what you'd like to get for it?

[Dattebayo]

bumpity bump

[float_6969]

So is the head available or not?

[dracula2084]

how much would u let go for the whole swap...

[plv]

Do you still have the powersteering pump? I need one, let me know how much you want for it if you still have it.

[NBF823]

How much for everything? Are the pistons, rods, crank, and girdle there? How close are you to PA US. If you decide to part the package I still need a lot. Are you even in the US? My name is Jon. Do you have a S12 now? and do you know where to get S12 parts? Many I can't find.

[Dattebayo]

Well as it said right under my name, I live near Washington DC which I believe is in the United States.

I am not parting out yet.

I would like to get around 1K for everything. I hope it doesnt sound steep, cause I had to waste money piecing this all together over the last year or so.

[RalliartRsX]

Bump for a good guy and good parts. I have seen them personally and I was going to pick them up, but as you folks have seen, my car is currently for sale .

P.S check email.

[NBF823]

You may have a future deal! I'll try to save some more & shipping/driving there doesn't seem to bad. Dreams of 4-valves, oil squirters, and a girdle top sugar plum fairies any day. Please update the post to inform of outcome. P.S.: I thought D.C. seceded from the rest of the nation on account of we were holding you-all back!?

[Dattebayo]

RalliartRsX, thanks for meeting me and grabbing a beer, it was cool! Sorry to hear about your car

NBF823, shoot me an email [email protected] would love to talk times, places and pics or whatever. We have a no go on sugar plum fairies tho, the neighbors were complaining about pixie dust on everything so we had to let them go.

Oh, and DC does all it can to push onward into idiocy, so don't get in our way. Dammit! Theres no money in the street fund either... I can't wait to see what new kind of crackhead the people elected into office yesterday.

[codyisbad]

Do you still have the pretty much full swap? or what parts if any left?

[themadscientist]

RalliartRsX, thanks for meeting me and grabbing a beer, it was cool! Sorry to hear about your car

NBF823, shoot me an email [email protected] would love to talk times, places and pics or whatever. We have a no go on sugar plum fairies tho, the neighbors were complaining about pixie dust on everything so we had to let them go.

Oh, and DC does all it can to push onward into idiocy, so don't get in our way. Dammit! Theres no money in the street fund either... I can't wait to see what new kind of crackhead the people elected into office yesterday.

I seent tha videeo, the ***** set him up!

[NBF823]

Where you been? Did you get my latest e-mail?

[Dattebayo]

Yeah. Did you get mine?

Do you really need me to contact you here so I can contact you there? Now Im confused...

[Dattebayo]

Buyer wasted my time, keeping me on until the very night before. Can I possibly get some serious interests?

[hsoj_v]

Here's someone selling a FJ24 http://www.network54.com/Forum...ngine