ca bov
-
fallen180sx
- Posts: 680
- Joined: Mon Apr 12, 2004 10:49 am
- Car: 90 Sil80
- Contact:
-
fallen180sx
- Posts: 680
- Joined: Mon Apr 12, 2004 10:49 am
- Car: 90 Sil80
- Contact:
Re: ca bov (fallen180sx)
or to be more accurate.. this http://w1.igateway.com/clients...=form
or could you use the bov itself on the stock piping?
or could you use the bov itself on the stock piping?
-
float_6969
- Moderator
- Posts: 17366
- Joined: Mon Aug 26, 2002 1:55 pm
- Car: CA18DET swapped 1995 Nissan 240sx (too many mods to list)
2015 SV Leaf w/QC & Bose (daily) - Location: Topeka, Kansas
- Contact:
-
WeldingHank
- Posts: 559
- Joined: Tue Jan 27, 2004 8:07 am
- Car: 1989 240sx CA18DET
Re: (1mns13)
an SR cold pipe won't work, the SR TB is in a different position than the CA's. but that BOV kit will.
-
themadscientist
- Posts: 26254
- Joined: Tue Nov 12, 2002 3:30 pm
- Car: R32 GTR, DR30 RS Turbo, BRZ, Lunchbox, NSR50 Sportster 883 Iron
- Location: Staring down at you with disdain from the spooky mountaintop castle.
Re: (WeldingHank)
It won't work, mail it to me immediately
-
biosehnsucht
- Posts: 1839
- Joined: Thu Feb 26, 2004 10:20 pm
- Contact:
Yeah, the cold pipe won't work.. BUT ONE OF THESE DAYS I'll MAKE IT WORK!!!
Since I got this 5Zigen SR coldipipe along w/ the stock CA one and all the SR piping and AR SMIC for SR from TMS ...
hrm I also need to properly mount the SMIC, the outside mount bolted up fine (Thats how the stock resonator bolted up) but noplace on the inside to mount it, haven't tried drilling and tapping holes yet for it.. right now the weight is being held by the IC piping
I clamped the (@#^% out of them mofos!
That and I still haven't hooked up the Prof Sheepdog BOV I got from him either, I've just got the stock hotpipe there for now.. I need to get some hose that will fit the BOV to recirc it and plumb that in before the turbo.. I'll probably get some 90 deg exhaust peices or such to make a new pre turbo pipe and attatch fittings to that.. but not anytime soon, I'm lazy.
Although it's tempting to try throwing fireballs.. and I still have the old dead cat (previous owner hollowed it out) laying around, so then I wouldn't dmg my still good random tech cat haha
Since I got this 5Zigen SR coldipipe along w/ the stock CA one and all the SR piping and AR SMIC for SR from TMS ...
hrm I also need to properly mount the SMIC, the outside mount bolted up fine (Thats how the stock resonator bolted up) but noplace on the inside to mount it, haven't tried drilling and tapping holes yet for it.. right now the weight is being held by the IC piping
I clamped the (@#^% out of them mofos!
That and I still haven't hooked up the Prof Sheepdog BOV I got from him either, I've just got the stock hotpipe there for now.. I need to get some hose that will fit the BOV to recirc it and plumb that in before the turbo.. I'll probably get some 90 deg exhaust peices or such to make a new pre turbo pipe and attatch fittings to that.. but not anytime soon, I'm lazy.
Although it's tempting to try throwing fireballs.. and I still have the old dead cat (previous owner hollowed it out) laying around, so then I wouldn't dmg my still good random tech cat haha