brembo calipers and stock black wheels

Shocks, springs, sway bars, coliovers, bushings, brakes, wheels, tires - This is the place to discuss G-Series suspension modifications!
smspb123
Posts: 1
Joined: Tue Sep 16, 2008 3:27 pm

Post

hey ive got an 06 g35 and i was wondering i can get brembo calipers without getting the whole like $3000 big brake kit? also i have the stock 18" 7 spoke wheels but they have a horrible finish but i love the look so i was looking to see if anyone knows anywhere that i could those in black maybe? any help is greatly appreciated


User avatar
RED_DET
Vendor
Posts: 5335
Joined: Tue May 13, 2003 5:07 pm
Car: 2004 Infiniti G35 Sedan 6 spd
2011 Infiniti G37x
1992 Nissan Sentra SE-R SR20DET
Chevrolet Corvette Z06
Location: Louisville, KY
Contact:

Post

For used brembo setup, you will spend at least 1500. Even at that, I would still get new pads and maybe rotors depending on the condition of the used ones. So close to 2k now. You can paint the wheels yourself if you want. Aircraft removal aerosal. After stripping off the old paint, clean the surface and sand with 800 to 1000 grit sand paper to rough up the surface. Tape of the tires so no over spray gets on the tires. Put a few coats of duplicolor wheel primer on the wheels. Let it dry, then apply a few coats of whatever color you wish duplicolor wheel paint. Lastly, apply at least 1 coat of clear. You can do it yourself for less than $50. You will just have to put in some work though.


Return to “G35 and G37 Suspension, Brakes, Wheels and Tires”