brake problem

[aoktech]

well i need help with my 1990 Q45 i got a little low on brake fluid, so i decided to change front brake but the sun went down so i bleed the brake in the am. upon doing so only little fluid came out of calipers i repeated the steps about 4 time at time getting a lot of fluid out and at time getting little out, while holding the pedel down it feels like i'm releasing the bleeder valve but that isn't the case as of right now i have no brakes please help

[Ace2cool]

You gotta bleed the brakes in order. Start from furthest out from the BMC and work your way in. It takes a while. I'd look into some speed bleeders. They make the job insanely easy, as long as you keep an eye on the fluid level.

[bruce2]

Just in making sure you are doing it right, do you have someone to help you to pump and hold the break while you loosen the valve and tighten before the helper release and pump again? The bleeding sequence usually is RR, RL, FR and then FL.