Brake Clicking

ONLY for ADVANCED technical discussion about the 240sx!
tkoppab
Posts: 23
Joined: Mon Oct 15, 2007 10:18 pm
Car: 1995 Nissan 240sx

Post

Tried to find a few threads but nothing helped.

ALright, i have my 95 240, no abs, and whenever i tap the brakes or hit them harder, the front driver side caliper always does a loud click sound. The brakes work fine and nothing is wrong, but I dont want this noise to do some serious damage if its something that needs to get fixed asap. I'm hoping its just a loose caliper, any ideas? thanks.


User avatar
mattchow88
Posts: 65
Joined: Mon Jun 28, 2010 7:55 pm
Car: 1993 240sx blacktop sr20DET Gt2871 750cc inj, JWT s3 cams, BC springs, Z32, FMIC, Manual boost control.
Location: wisconsin

Post

are you positive its your brakes and not a suspension or shock pivot that is binding. ive had it happen to me before. can you jack up front and make it do it spining it by hand.

canyouSAY240
Posts: 31
Joined: Sun Oct 03, 2010 5:52 pm
Car: 89 coupe
Location: las vegas

Post

he has a good point about the suspension, if you have changes out the springs and didnt put back in that round rubber piece you will get some strange noises. and if its the brakes what i would do is make sure the caliper is tight, and do you have the metal shims on the pads???

Justinians_2:40
Posts: 34
Joined: Sat Dec 13, 2008 8:55 pm
Car: 95 240sx

Post

I second that, both. If you're sure it's the brakes, and they are tightened down, replace the little metal shims in the brakes, they keep the pads from moving back and forth.

tkoppab
Posts: 23
Joined: Mon Oct 15, 2007 10:18 pm
Car: 1995 Nissan 240sx

Post

Hmmmm... Interesting, i have replaced the suspension so that might be it. But i think it might be the shims being lose or the caliper itself. I'm pretty positive that its the brakes because even if i just tap them when I'm already moving, a tap so that it wont even slow down the car, it makes the noise. I'm going to check out all the options and get back to you guys cause the sound is loud. Thanks a bunch. will get back to you guys.


Return to “240SX Technical Forum”